to the Power Unit by the installer.
measures 12" x 10" x 6".
as
herein
The Floorizwarm System is a low voltage, resistance type heating
Floorizwarm utilizes AC power supply for various sized heating
M337 Programmable Thermostat which includes a remote bulb
provide low-voltage electricity to the heating element. It is engineered
Floorizwarm Heating Element must always be
The Power Unit
and Requirements
M337
installed in a heat sink, such as concrete, light-weight concrete or
SYSTEM DESCRIPTION
5. Activation Device The Floorizwarm System is activated by an
Programmable Thermostat with
per square foot.
concrete, light-weight concrete or mortar bed
to provide simple and problem free operation.
Remote Bulb Sensor
STANDARD 1012
System Description, Design Information,
DESIGN INFORMATION
operate. The thermostat provides a digital readout, and can be used
heated. The Floorizwarm Heating Element is factory-connected to
Floorizwarm Cable, Power Unit and
applications. Floorizwarm Heating Element is designed to be spaced
Heating Element, the length of the heating element, and the size of
(referred
Heatizon Systems Floorizwarm Installation Manual
in auto mode or manual mode.
system. Installations include:
STANDARD 1673
Heatizon Heatsink Kit
down transformer and other electronic components necessary to
"Floorizwarm Heating Element" and "Tuff Cable") comes in various
1. The Power Unit-- The Floorizwarm Power Unit includes a step-
Heatizon Floorizwarm system is a low-voltage electric radiant heating
to 110 square feet of floor area. A Floorizwarm System consists of
Heating
non heating Cold Leads, which are 20 feet long, and are connected
sensor with 15' of cable. This thermostat requires 120 VAC power to
system which is ideal for floor warming and space heating in areas
Thermostat
110 square feet and smaller. Floorizwarm Systems are designed to
CONFORMS TO UL
at specific intervals and lengths to produce a specified amount of heat
-I-
three primary components:
Element
durable coated copper cable that is chemical and gasoline resistant.
2. The Heating Element The Floorizwarm Heating Element is a
both
Floorizwarm
mortar bed, or a Heatizon Heatsink Kit.
lengths and gauges, depending on system size and area to be
Floorizwarm Heating Element Layout
the Power Unit.
dependent on the spacing between adjacent runs of Floorizwarm
AND UL
The heat density per square foot of the Floorizwarm System is
deliver approximately 10 to 15 watts per square foot, and to cover 15
to
9700682
< [Pag.2] > >>
Esta version es la html del arhivo pdf Floorizwarm_Install_Manual, genearada por domotica.name desde www.warmzone.com
Archivos relacionados:BlueHeat-Ins ComfortTileM DMC-IOM-Orig ECO-heater-b ETI-GIT-3A ETI-GIT-4 ETI-LCG-1 ETI-LCG ETI-LCR GXmanual_Jan LXCableInsta LXDatasheet NAGX-Ins-A-O OJ-ThermUser OJnon-progra RetroHeat-In System_Appli ThermalBoard Tile-Heat-Th february08_w march_newsle quicknet_spe quickstat_io roofheatinst tile-heating actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
