provided slot.
calendar days from the date of issue.
B a
3 8
Rear View of Doorbox
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666
at (800) 472-5555 or Electronic Specialists Inc.
ly boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include
d u
7 1
3. It is best if you are on site.
p o
F
1. Know the model number, the serial number and what software version you have (see serial label).
E-10A/EWP
distributor will then replace the product over the counter at no charge. The distributor will then return the product to
mended that a surge protector be installed to
Wiring Shown for:
s tta
(included)
o n
IIn
12V DC
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED
followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.
number. The customer MUST have a complete description of the problem, with all pertinent information regarding the
Wires MUST be
Surface Mount Box
e ......7
a x
K-1700-3/EWP
supply and wire nuts (see Diagram 1). Note: Wires can be connected in either polarity.
1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA)
!
1 5
Vikings sole responsibility shall be to repair or replace (at Viking's option) the material within the terms stated above. VIKING SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSE-
Our Technical Support Department is available for assistance Monday 8am-4pm and Tuesday-Friday 8am - 5pm central time. So that we can give you better service, before you call please:
routed through the
o rrtt L
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manu-
n s
or
a ttiio
P
3 8
(not included)
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input
a lllla
Front View of the VE-LIGHT
(W-1000 shown, not included)
6 ..8
u c
1. Customer must contact Viking's Technical Support at 715-386-8666 to determine possible causes for the problem. The
Diagram 2
3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
Viking Electronics, 1531 Industrial Street, Hudson, WI 54016
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
Viking using the same R.A. number.
(see Diagram 2).
Step 5. Carefully place the phone or doorbox back into the surface mount box, making sure the wires stay in the slot
Wiring Shown for:
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
x B
protect against such surges. Contact Panamax
3 4
7 1
P rro
5
Call
n e
IMPORTANT: Electronic devices are
station electrical surges from both the
p p
Step 1. Disconnect power from the doorbox or phone.
L iin
k L
120V AC
Step 3. Connect the two wires from the VE-LIGHT to the power input terminals of the doorbox or use the included power
4 3
E-1600-20A/EWP
defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.
W-3000/EWP
Step 4. Place the VE-LIGHT bracket against the upper mounting lip of the surface mount box and route wires through the
c tt S
Step 2. Remove the doorbox or phone from the surface mount box (VE-5X5, VE-6X7, VE-5x10 or E-1600A-BLT-EWP).
4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't
e ......7
Fax Back Doc 428
susceptible to lightning and power
RETURNING PRODUCT FOR EXCHANGE
(VE-5x5 shown, not included)
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others.
Printed in the U.S.A.
o d
and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14)
3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your
6 6
F a
AC outlet and the telephone line. It is recom-
such changes.
2. Have your Technical Practice in front of you.
WARRANTY
6
(included)
S u
E-30-PT/EWP
a c
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
ZF301930 Rev A
8 6
E-1600A-BLT-EWP
E-1600-30A/EWP
tation of incidental or consequential damages, so this limitation may not apply to you.
W-1000/EWP
at (800) 225-4876.
L iin
ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:
n
E-30/EWP
6 ..4
5 ..3
QUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESSED OR IMPLIED, OR FOR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limi-
provided slot (see Diagram 1).
2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static
4 5
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
RETURNING PRODUCT FOR REPAIR
The following procedure is for equipment that needs repair:
5 ..3
VE-LIGHT
8 6
BEYOND THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
u p
8 6
factured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's
customer MUST be able to step through recommended tests for diagnosis.
Diagram 1
Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.
sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individual-
Adapter
1 5
Wire Nuts
n e
6 6
Phone or Doorbox
c k
< [Pag.2]
Esta version es la html del arhivo pdf ve-light, genearada por domotica.name desde www.vikingelectronics.com
Archivos relacionados:1900-series E-40 SL-1 SL aes-2000 c-1000b c-4000 cpa-7b cpc-1 cpc ctg-1 ctg dna-510 dva-2wa dva-3003 e-10-20a-ewp e-30 e-30-pt eram-60 es-1 es faxj-300 fbi-1a hd-1 hd hf-3w k-1900-4 lc-8 ldb-2 ldb-3 lla-4 lm-1a ls-4x4 m2w moh-2l mtg-10 pa_30 pan-1 pan pb-100 pi-150w privacy ps-2r rad-1a rc-3 rg-10a so-24a ve-boxes seguridad cctvsafe extremecctv freezealarm goodbarsecurity highpowersecurity icontrol infosecinstitute intamac jacksonsystems keepsafer mraccess napcosecurity nexusaudiosystems securityandmore securitymaninc smartvue techno-mall tripplite vigitron vikingelectronics wilife
