Enter Programming
p o
n e
3 8
To add a
Printed in the U.S.A.
p p
G. Touch Tone User Dialing Restriction (factory enabled)
I-N-G). It is recommended that you change the security code to a personal 6 digit (0-9) number in memory position #9
c k
Electronic Ringer
1
3 8
2
###
Speed dial number (see section C) 1-32 digits or pauses .............................................
6 5551234 6 9 + #0
1 5
F a
L iin
6
6 digits
4 5
and # to be pulse dialed.
9 7 5551234 + #0
To set dialing speed to normal - 120ms tones/10 pps (factory setting) ..........................
...to enable unlimited user dialing after the phone has speed dialed
5551234 + #0
#
c tt S
F
Q170600
Fax Back Doc 360
Toggles between pulse and Touch Tone dialing (see section C) ...................................
6
To restrict Touch Tone user dialing (factory setting) ......................................................
To add a 1 second pause anywhere in the dialing string ...............................................
5
Step 1 - See section A
such changes.
speed - 50ms on/off Touch Tones or 20 pps pulse dialing.
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
e rrn
d u
information, retrieve Fax Back Document 834.
5 ..3
R iin
d iin
An optional Q170600 internal ringer is available. For more
F. Touch Tone or Pulse Dialing
d d
phone number
n tte
u c
Step 2 - Enter Digits
1 for normal dialing speed - 120ms on/off Touch Tones or 10 pps pulse dialing. Enter
A d
n e
#0
Memory
then
Enter Programming
To enable Touch Tone user dialing ................................................................................
8 6
while in the programming mode. Note: The security code must be six digits in length and cannot contain a
then
To set dialing speed to fast - 50ms tones/20pps ...........................................................
#9
ber will toggle the dialing mode between Touch Tone and pulse (see section C).
T
a ll R
g e
4
.47 mF @ 250V
mode, enter
x B
A
ZF300950 Rev K
R
B a
6 6
#0
Note: You can NOT program a
n g
then
user dialing, enter 3 while in the programming mode. To enable user dialing, enter 4 while in the programming mode.
a c
5 ..3
Enter Programming
B. Quick Programming Guide
...to Touch Tone dial 555-1234
2 for fast dialing
Enter Programming
7 1
the K-1900 Series phones will restrict (hang up) when they detect any Touch Tone that they did not generate. To restrict
To add a 4 second pause anywhere in the dialing string (see section C) ......................
To add a # anywhere in the dialing string ......................................................................
7 1
o d
o rrtt L
n g
n IIn
Enter Digits
Location
D. Touch Tone and Pulse Dial Speeds
The K-1900 Series phones are factory set to automatically dial using Touch Tones. A 6 entered in the speed dial num-
...to clear the speed dial number or disable speed dialing
k L
S u
E. Security Code
or #.
...to dial a 9, a 4 second pause and then 555-1234
e ......7
8
4 3
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
Enter Programming
The K-1900 Series phone can be programmed to dial at normal or fast dialing speeds. While in the programming
3 4
8 6
2
...to set the dialing speed to fast
Enter Programming
7
Security Code, factory set to 845464 (see section E) ...................................................
6 ..4
1 5
a x
P
(included with ringer)
L iin
P rro
8 6
a n
3
e rr
6 ..8
u p
To clear all programming and change back to factory settings ......................................
The K-1900 Series phones is factory set to restrict fraudulent calls from hand held pocket dialers. After speed dialing,
g a
To Program the K-1900 Series Phone to...
C. Programming Examples
A six digit security code is required to access the programming mode. The factory set security code is 845464 (V-I-K-
e ......7
...to pulse dial 555-1234 followed by a Touch Tone 9
6 6
4
anywhere in the dialing string .....................................................................
n a
<< < [Pag.4]
Esta version es la html del arhivo pdf 1900-series, genearada por domotica.name desde www.vikingelectronics.com
Archivos relacionados:E-40 SL-1 SL aes-2000 c-1000b c-4000 cpa-7b cpc-1 cpc ctg-1 ctg dna-510 dva-2wa dva-3003 e-10-20a-ewp e-30 e-30-pt eram-60 es-1 es faxj-300 fbi-1a hd-1 hd hf-3w k-1900-4 lc-8 ldb-2 ldb-3 lla-4 lm-1a ls-4x4 m2w moh-2l mtg-10 pa_30 pan-1 pan pb-100 pi-150w privacy ps-2r rad-1a rc-3 rg-10a so-24a ve-boxes ve-light seguridad cctvsafe extremecctv freezealarm goodbarsecurity highpowersecurity icontrol infosecinstitute intamac jacksonsystems keepsafer mraccess napcosecurity nexusaudiosystems securityandmore securitymaninc smartvue techno-mall tripplite vigitron vikingelectronics wilife
