cpspkey_man 4 | Biblioteca actuadores touchplate

Off only turn the relay(s) off

they are labeled A01 to A16 for the first, B01 to B16 for the second, ... up to F16. Each input may be

2. Select the input with the up/down keys.

Setup is used to program the matrix of input and output mappings. There is 16 output for each board;

Auto Off the relay(s) will turn on then turn off after a selected time 15, 30, 60, or 120 minutes.

· Switch input schedules from will help in programming.

· Make sure inputs are "Not Used" for all relays except those to control.

On only turns the relay(s) on

The types of actions a relay can perform are:

result in unsynchronized relays.

· CYCLE inputs should never control more than one relay. To do otherwise will eventually

Notes:

Maintain relay(s) is on when the contact is closed

then CLEAR to exit the menu.

Blink Warn the relay(s) will flash off momentarily then turn off after five minutes unless cancelled

3. Press the ENTER key to select the input

· One switch can be used as an ON for a group and an OFF for another group to toggle lighting

1. Select the relay using left/right keys.

Flash when the contact is closed the relay(s) flash repeatedly

Repeat as necessary, press an arrow key

Cycle changes the relay with each tap

assigned a separate function for each relay.

Any input present may be programmed to control a single relay or an entire group of relays. Switch

groups.

Switch Setup Menu

function.