is lit when 28 VDC is supplied to the switch common output. The right LED,
The board contains three green LED's. The left LED, labeled "Panel Supply", is
fused with thermal resetting fuses.
The relays are turned on or off in sequence to prevent large loads from being
For instance, when the switch common terminal is connected to the master on
POWER BOARD
ALL
lit when 28 VDC is fed to the relays. The middle LED, labeled "Switch Supply",
CPS 0008-0048 System Manual
and master maintained outputs.
PILOT
SWITCH
ALL
MNTN
3.
terminal, via a momentary contact switch, all the relays will be turned ON.
Master On And Master Off
Touch-Plate Lighting Controls
The power board affects the entire panel. It contains the master on, master off,
labeled "Pilot Supply", is lit when 6.3 VAC is provided. All three are separately
SWITCH
COMMON
6
2.
Figure III-4 Power Board
PANEL
Two terminals, green for ON and black for OFF turn the whole system on or off.
The transformer secondaries are fed into a power board which converts the 20
Power Board
ALL
Inputs
switched at once, and to prevent spikes on the power line.
a.
VAC into 28 VDC. This voltage operates the relays and electronics.
ON
CPS-8001B
COMMON
PILOT
OFF
<< < [Pag.9] > >>
Esta version es la html del arhivo pdf cps8-48_manual, genearada por domotica.name desde www.touchplate.com
Archivos relacionados:3000pl 5000_5100FP 8000Key ac-ir apd cc cpd8000d cps cps-1011 cps-dmx_spec cps1020 cps1030 cps1031 cps1040 cps1045 cps1050 cps1055 cps1065 cps1090 cps16-24tk cps_spec cpsp cpsp_i_manua cpspkey_man cpspkeypad cpx dmx dmx_man dmx_sell_she mcd-r mystique pch1lcx1 ps r8 rcp rcp_manual rcx rpb sceneset ss-100 tk troubleshoot tvr ultra zonez-manual actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
