·
·
switch
Easy to install and start-up; Hinged, locking cover.
enables the operator to sweep an entire panel with one input
most powerful, flexible and inexpensive systems available.
relay. The relay will switch according to the last input signal. Input
40"x24"x4.25"
types: CYCLE (single button momentary), discreet
annunciation.
for each relay.
20 Amp 120 and 277 VAC lighting relays, (347 VAC Canada).
® Lighting Controls
top slot in panel.
Maintain / Astronomic Clock / Holiday Schedules
·
Any
·
®
enclosure, 3000-PL relays, a 120/277 volt dual primary and dual
logical control groups. It is designed to accept the following input
·
ON/OFF
with a Building Management System, Security System, A/V System
Time-Keeper Features:
Windows
include each relay in one of two groups or exclude it from the
maintained) can be wired to the inputs of the control board for each
Devices.
·
requirements. The relay panel can be combined with CPS Dimmer
local/manual override.
CPS is used where flexible control of lighting or any other
Master control with both central automated controls along with
groups.
electrically controlled load is needed. It consists of a 16 gauge steel
1830 Wayne Trace
based
Assignable Zone Masters, two per Control Board.
Accepts Cycle, On/Off, & Maintained switch inputs, all standard
includes
relays.
CPS panels have the ability to group relays in several ways.
light
pilot
TM based software and a PC com port.
·
Fax: 260-420-3651
inputs for each relay. In addition, each relay has a 6.3 VAC output
·
·
devices may be manual switches, time clocks, photo-sensors,
Simple
be converted into a dry contact for status feedback to interface
panels and CPS Solution Series control devices to offer one of the
The Control Plus Series (CPS) is a high technology lighting control
·
Phone: 260-424-4323
Touch-Plate
·
toggle wall switch or any sustained contact enclosure).
control
16 channel output / 16 Event per day / Outputs Momentary or
CPS is an "Event-Driven" control system, so it obeys the last signal
Integrates Occupancy Sensors, Photocells, and BMS Controls.
Simple to program via on-board keypad or using included
The panels allow loads to be controlled by multiple inputs and
combination of switching devices can be wired to the control board
Zone mastering is provided for each relay in groups of eight on a
Touch-Plate
(switch, time clock, etc.).
In addition to all other individual and zone inputs, a Master input
occupancy sensors or any device that produces a switch signal.
Includes all standard CPS features; Time-Keeper board mounts in
relay control board. The Zone Master slide switches can be set to
·
together making a large group, or kept separate in groups of eight
system designed to meet the vast majority of lighting control
Factory pre-assembled and tested; ETL listed
Fort Wayne, IN 46803
® Lighting Controls
or other system, (see Solution Series).
CPS-0016/24 Time Keeper
for L.E.D. indicators at the switch locations. This output signal can
(momentary On, momentary Off), and MAINTAINED (standard
remote
secondary transformer, power supply card, and logic control boards
pre-wired at the factory.
·
Multiple relay control boards can be linked to operate
received. Any combination of switching devices (momentary, cycle,
[Pag.1]
Esta version es la html del arhivo pdf cps16-24tk, genearada por domotica.name desde www.touchplate.com
Archivos relacionados:3000pl 5000_5100FP 8000Key ac-ir apd cc cpd8000d cps cps-1011 cps-dmx_spec cps1020 cps1030 cps1031 cps1040 cps1045 cps1050 cps1055 cps1065 cps1090 cps8-48_manu cps_spec cpsp cpsp_i_manua cpspkey_man cpspkeypad cpx dmx dmx_man dmx_sell_she mcd-r mystique pch1lcx1 ps r8 rcp rcp_manual rcx rpb sceneset ss-100 tk troubleshoot tvr ultra zonez-manual actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
