Phone: 260-424-4323
The CPD-8000D provides sixteen high and low preset
Selectors
CPD-8000D Dimming Scene Module
featured dimming control to both commercial and
maximum
output. The fade rate for each channel in each scene
Outputs
Selectors
the switch will then bring the light to the given preset. A
the switch is released. When the switch is released,
Sales Support Email: sales@touchplate.com
equipment designed for 0-10V control.
Compatible with CPS Time-Keeper time clock
indicated by the corresponding switch's LED. Scene-Set
Can operate 0-10VDC and MCD independently or
simultaneously.
areas at the press of a single switch! Active scenes are
Use with BAS for peak load shaving utilizing 0-
control anywhere from 1 to 8 outputs at the same time.
for
Fax: 260-420-3651
Option
residential applications.
Fade Rate
Fort Wayne, IN 46803
thresholds
8 channels of output.
8" X 6" (same as CPS-8000 control board)
·
This allows varied lighting and fade rates in different
the level is memorized as a preset level. A single tap of
Programmable fade rates of 3, 9, or 30 seconds.
·
The Touch-Plate CPD-8000D module is a member of
can be independently selected as 3, 9, or 30 seconds.
Power Connector
Programmable Emergency override or all-off.
·
System
·
Copyright
levels. By pressing and holding the ON or OFF
1830 Wayne Trace
·
® Lighting Controls
EEPROM memory prevents failure. Outputs will
minimum levels.
·
Touch-Plate
·
facility control devices. The CPD-8000D expands the
World Wide Web: http://www.touchplate.com
Touch-Plate's Control Plus Series family of innovative
These include:
Provides a 0-10VDC signal for incandescent
MCD Network
return to the last level at power-up.
panel designed specifically for CPS and CPSP.
·
·
The CPD-8000D can store up to 16 Master Scenes to
These master scenes are fully programmable for each
Programmable at each individual switch station.
0-10V Analog
2001 Touch-Plate Technologies
Switch Connectors
·
CPS and CPSP capabilities by integrating fully
The features designed into this module enable it to be
rooms, open office areas for peak load shedding, and of
·
Indicators
Board mounts in any slot in CPS Lighting Control
MCD-4000 dimmers over RS-485 network.
Programmable
8 or 16 programmable scenes; 8/16 individual
mode can be activated by a switch input or by pressing
the 0-10VDC signal.
Operates two of Touch-Plate Lighting Control's
course residences.
·
Each channel will sink 20 mA or source 35 mA of
switches, the output will dim in the given direction until
and
dimmers, dimmable fluorescent ballasts, and audio
restaurants, churches, classrooms, lecture halls, board
·
second tap on the switch will then dim the light on or
S1
presets.
LED
off, depending on the switch used.
10VDC dimmable fluorescent ballasts.
S2
Use for building energy management:
® Lighting Controls
the Scene-Set button on the control board.
·
Connection
used in a multitude of applications.
Touch-Plate
·
[Pag.1]
Esta version es la html del arhivo pdf cpd8000d, genearada por domotica.name desde www.touchplate.com
Archivos relacionados:3000pl 5000_5100FP 8000Key ac-ir apd cc cps cps-1011 cps-dmx_spec cps1020 cps1030 cps1031 cps1040 cps1045 cps1050 cps1055 cps1065 cps1090 cps16-24tk cps8-48_manu cps_spec cpsp cpsp_i_manua cpspkey_man cpspkeypad cpx dmx dmx_man dmx_sell_she mcd-r mystique pch1lcx1 ps r8 rcp rcp_manual rcx rpb sceneset ss-100 tk troubleshoot tvr ultra zonez-manual actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
