vm54001 9 | Biblioteca actuadores temperatureguard

message is played for larger corrections.)

Field Calibrating Temperature Readings

b) You will hear "Adjust Temperature. Enter Temperature Input"

You will hear the corrected temperature and the corrected temperature

e) Enter the actual temperature measured using the standard, then press

rected value is 30º and the min corrected value is 10º. An "invalid"

To return to the Set Limits Menu press 0

sensor. A calibrated standard must be used to obtain the actual tempera-

The Temperature & Power Guard allows the user to correct small tempera-

d) You will hear "Enter Sensor Number x Actual Temperature, then press

a) From the Main Menu, press 7

pound"

will be displayed on the display.

PIN was entered initially. If the correct "Full Access" PIN is not entered,

Use * for negative numbers (i.e. *20 = -20º)

ture.

The "Full Access" PIN will be requested if the "Confirmation Only"

the Temperature & Power Guard will hang up.

10º from the currently displayed temperature.

ture measurement errors due to sensor cable extension length for each

c) Enter the number of the sensor you want to correct (1-4)

The maximum the temperature measurement can be corrected is +-

(i.e. If the temperature currently being displayed is 20º, the max cor-