Call the Temperature & Power Guard again.
Hang up one ring before the other device answers.
A fax machine on the same line as the Temperature & Power Guard is set
To verify telephone communications, perform the following test.
which has a fax or answering machine connected to it?
again. After two rings, the Temperature & Power Guard will answer.
20
If the Temperature & Power Guard has called all programmed contact num-
Dial the phone number
to answer after 4 rings. The Temperature & Power Guard is programmed to
& Power Guard will repeat the warning message. This warning message
Hang up.
8
The Temperature & Power Guard will answer.
If the correct PIN number is not entered the Temperature & Power Guard
Enter #999 for the PIN.
background image
If the correct PIN number is not entered within 4 seconds the Temperature
will call the next programmed contact telephone number.
5
Guard to continue calling any remaining programmed telephone num-
verify that it answers the phone.
Using another phone line, call the Temperature & Power Guard and
Verify at least one programmed telephone number.
6
Programming Repeat Warning Messages section.
1
Watch the display and note any messages present.
4
How can I connect the Temperature & Power Guard to a Phone Line
2
2
Program the Temperature & Power Guard to answer after one more ring
can be repeated up to 2 times by changing the programmed value. See the
grammed telephone number's.
Wait no longer than 30 seconds, then dial the phone number again.
Hang up.
Verifying telephone communication
Do not enter your PIN if you would like the Temperature & Power
bers without having the correct PIN number entered, it will wait 20 minutes
1
perature & Power Guard receives confirmation either locally or remotely.
answer after 5 rings. To access the Temperature & Power Guard, dial the
To call and access the Temperature & Power Guard:
4
bers.
3
number, let it ring three times, then hang up. Wait 20 seconds and call
and repeat the sequence until the alarm condition goes away or the Tem-
7
The Temperature & Power Guard will perform a test call to your pro-
than the other device. This allows the other device to always answer first.
3
For Example:
<< < [Pag.20] > >>

Esta version es la html del arhivo pdf vm54001, genearada por domotica.name desde www.temperatureguard.com

Archivos relacionados:AN505E ANDCP-E DCP_Getting_ DCP_IP_Setup DCP_Manual_v DCP_manual IP_Setup_rev MA41201 MA412_Wiring MOLLY303_Wir MOLLY305_Wir NetworkAddre VM500-5_Inst VM500_INSTAL VM500_Mounti VM5032-2002 VM50522 VM505E_510Em VM52002 VaccineRepor ab305v aci-1k-2w-bp aci-1k-2w-sp computer_roo ma401_wiring ma403 molly303_spe pump_sequenc rl-b_wiring_ vm500-5E-DCP vm500-6wirin vm501_manual vm501_specsh vm502_specsh vm504_manual vm505 vm50518 vm50520 vm5057r14 vm506_manual vm50811 vm508_specsh vm509 vm51001 vm510_specsh vm511_specsh vm540lv_wiri actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone