vm54001 19 | Biblioteca actuadores temperatureguard

What happens when the Temperature & Power Guard calls?

Integrated Power Input is in alarm condition.

NOTE: The callout delay will be skipped if Powered Input 1-4 or the

grammed alarm time delay.

the Local Identification number on the pager screen. The Temperature

When the Aux Alarm Input is active for greater than its programmed alarm

The Temperature & Power Guard will callout when any sensor/input is in an

time delay.

number.

When is a sensor/input in alarm condition?

system to answer the call.

has been out of limits for, x hours and y minutes.

grammed alarm time delay.

When a temperature sensor has been out of limits for greater than its pro-

The Temperature & Power Guard will dial the contact number exactly

The Temperature & Power Guard will wait for a person or voice mail

The Temperature & Power Guard will ask for the PIN number.

stop speaking or the voice mail system's outgoing message to stop.

Frequently Asked Questions

the *.

For voice contact numbers, the Temperature & Power Guard will play

& Power Guard will then hang up and call the next programmed contact

The Temperature & Power Guard will report any alarm conditions (i.e.

When does the Temperature & Power Guard callout?

edged, unless the alarm still exists and the reminder call has been enabled.

(programmable) to allow local personnel time to react to the alarm.

For pager contact numbers, the Temperature & Power Guard will print

will not call again because the current alarm condition has been acknowl-

turns on the alarm relay and buzzer, and then waits two minutes

the recorded personal identification message.

first digit. The Temperature & Power Guard will dial all digits following

If the contact number was programmed as a pager number (* is the

alarm condition and has not been confirmed.

When the plug-in power has been out for greater than its programmed

When a power input is not in its "normal state" for longer than its pro-

"Warning, Sensor 2, "sensor 2 recorded message", is 89 degrees and

alarm time delay.

When a temperature sensor opens or shorts after having been connected.

as it was programmed.

Once the PIN number has been entered, the Temperature & Power Guard

When an alarm condition first occurs, the Temperature & Power Guard

The Temperature & Power Guard will beep while it waits for a person to