When a temperature sensor opens or shorts after having been connected.
grammed time delay.
When an alarm condition first occurs, the Property Guard turns on the alarm
gramming Repeat Warning Messages section.
When a temperature sensor has been out of limits for greater than the pro-
If the correct PIN number is not entered the Property Guard will call the next
swer the call.
peated up to 2 times by changing the programmed value. See the Pro-
The Property Guard will ask for the PIN number.
4
5
again because the current alarm condition has been acknowledged, unless
programmed contact telephone number.
When the door sensor has been open longer than the programmed time
ing or the voice mail system's outgoing message to stop.
3
background image
When does the Property Guard callout?
limits for, x hours and y minutes.
The Property Guard will callout when any sensor/input is in an alarm condi-
Once the PIN number has been entered, the Property Guard will not call
Frequently Asked Questions
The Property Guard will wait for a person or voice mail system to an-
19
1
2
When the power has been out for greater than five minutes.
first digit. The Property Guard will dial all digits following the *.
The Property Guard will beep while it waits for a person to stop speak-
hang up and call the next programmed contact number.
Guard will repeat the warning message. This warning message can be re-
If the correct PIN number is not entered within 4 seconds the Property
the alarm still exists and the reminder call has been enabled.
relay and buzzer, and then waits two minutes to allow local personnel time
For voice contact numbers, the Property Guard will play the recorded
sor 2, "sensor 2 recorded message", is 89 degrees and has been out of
to react to the alarm.
For pager contact numbers, the Property Guard will print the Local Iden-
6
delay.
The Property Guard will dial the contact number exactly as it was pro-
If the contact number was programmed as a pager number (* is the
grammed.
tification number on the pager screen. The Property Guard will then
The Property Guard will report any alarm conditions (i.e. "Warning, Sen-
What happens when the Property Guard calls?
tion and has not been confirmed.
When is a sensor/input in alarm condition?
personal identification message.
<< < [Pag.19] > >>

Esta version es la html del arhivo pdf vm51001, genearada por domotica.name desde www.temperatureguard.com

Archivos relacionados:AN505E ANDCP-E DCP_Getting_ DCP_IP_Setup DCP_Manual_v DCP_manual IP_Setup_rev MA41201 MA412_Wiring MOLLY303_Wir MOLLY305_Wir NetworkAddre VM500-5_Inst VM500_INSTAL VM500_Mounti VM5032-2002 VM50522 VM505E_510Em VM52002 VaccineRepor ab305v aci-1k-2w-bp aci-1k-2w-sp computer_roo ma401_wiring ma403 molly303_spe pump_sequenc rl-b_wiring_ vm500-5E-DCP vm500-6wirin vm501_manual vm501_specsh vm502_specsh vm504_manual vm505 vm50518 vm50520 vm5057r14 vm506_manual vm50811 vm508_specsh vm509 vm510_specsh vm511_specsh vm54001 vm540lv_wiri actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone