vm50811 9 | Biblioteca actuadores temperatureguard

detected temperature. If larger corrections appear to be

calibrated temperature indicator must be used to obtain the actual

The Computer Room Guard allows the user to correct for humidity

temperature.

m) Proceed to step 5.a

a) From the Main Menu, press 2 to Set Limits

measurement errors due to sensor cable extension length. A

e) You will hear the value you just entered

Press 2 to return to the Set Limits menu

5. Programming the humidity callout delay time

placement.

h) You will hear the newly corrected temperature and the corrected

b) Press 1 to make a change

relative humidity.

Programming Humidity Corrections

pound"

Repeat the steps 1 to 5 for each connected sensor/zone.

for an immediate callout)

The temperature can only be corrected by ą10ē from the originally

d) Enter the time delay in minutes (i.e. 15 for 15 minutes or 0 minutes

c) You will hear "Enter number then press pound"

b) You will hear "Enter Zone"

necessary, verify installation of temperature sensors and their

The Computer Room Guard allows the user to correct for temperature

l) You will hear the value you just entered (i.e. 70 percent)

e) Enter the number of the zone whose temperature sensor reading

calibrated relative humidity indicator must be used to obtain the actual

a) You will hear "Humidity alarm time delay is XX minutes, press 1 to

Acceptable range is 0 to 900 minutes

you wish to adjust.

g) Enter the actual temperature measured in the room, the press #.

f) Proceed to step 1.b

f) You will hear "Temperature Change. Enter number then press

measurement errors due to sensor cable extension length. A

c) Enter *

a) From the Main Menu, press 2 to Set Limits

temperature will be displayed on the display.

d) You will hear "Enter zone to change"

Programming Temperature Corrections

change"