vm50811 19 | Biblioteca actuadores temperatureguard

programmed numbers until either:

How can I connect the Computer Room Guard to a

set to answer after 4 rings. The Computer Room Guard is

number on the pager screen.

Messages section.

1 The Computer Room Guard will print the Local Identification

3. Wait no longer than 30 seconds, then dial the phone

The Computer Room Guard is called and the PIN number is

4. The Computer Room Guard will answer.

3 Turn on the Computer Room Guard.

Phone Line which has a fax or answering machine

2 Remove the sensor you wish to stop using.

1 Turn off the Computer Room Guard.

connected to it

programmed value. See the Programming Repeat Warning

How do I stop using a sensor

emergency phone call, perform the following steps:

1. Dial the phone number

number again.

The alarm condition goes away

answer first. To call and access the Computer Room Guard.

2. Hang up one ring before the other device answers.

Program the Computer Room Guard to answer after one more ring

A fax machine on the same line as the Computer Room Guard is

than the other device. This allows the other device to always

For Example:

programmed to answer after 5 rings. To access the Computer

What happens when the Computer Room Guard calls a

A standard voice number is called and the PIN number is entered

pager?

entered

To stop monitoring a particular sensor without causing an

2 The Computer Room Guard will continue to call all