vm505 9 | Biblioteca actuadores temperatureguard

3. You will hear "Press one to change."

timer's dry contacts to pins 21 and 22. When the switch is closed the

tom right when the Time-of-Day input is active.

Using the VM500-5

2. You will hear the programmed PIN number

Programming a PIN Number

ture. The alarm override input is a dry-contact type. The VM500-5

4. You will hear "Press one to change"

7. You will hear the PIN number you just entered

The Alarm Override Input

The PIN number must be 4 digits and must not include a # sign.

7. Enter the number, followed by a #

3. You will hear the programmed number

The VM500-5 uses a 4-digit PIN number (0000-9999) to identify you

sources 12v at 12ma dc. To prevent the VM500-5 from calling out dur-

9. You will be automatically returned to the Program Menu

5. You will hear "Enter number"

2. If this is the first time setup, go to step 6

1. From the Program Menu, press 8 to change the PIN number

8. You will be automatically returned to the Program Menu

pin number)

6. You will hear "Enter number, then press pound"

5. Press 1 if you wish to make a change or press any other

4. Press 1 if you wish to make a change or press any other but-

bottom LED will light, and the VM500-5 will not call out.

6. Enter a four digit number (do not put a # anywhere in your

8. You will hear the number you just entered.

when calling the device or during callout procedures. After program-

Friday, June 27, 2003 15:26

The alarm override input is used to disable the emergency call out fea-

1. From the Program Menu, press 5 for the local ID

ing a defrost cycle, or a predetermined period of time, the user can wire a

page 9

button to return to the Program Menu

On models equipped with the display, the display show a "*" on the bot-

vm505.pub

ton to return to the Program Menu

ming the PIN number write it down here. _____________