vm504_manual 9 | Biblioteca actuadores temperatureguard

To enter a value with a decimal place use * as the decimal

step 1.a)

to step 5.g or press 0 to program a different sensor and return to

milliamp values.

To enter a value with a decimal place use * as the decimal

To enter a negative value, enter * as the first digit.

c) Press 1 to change the limit

Monitor and Alarm to generate a valid scale factor and offset value

f) You will hear the value you just entered (i.e. 55 psi)

h) Proceed to Step 5.a.

i) Press 1 to change the limit

e) Enter the value then press #.

The maximum number key presses is six. This includes a star

(Press 2 to skip to the programming the upper limit and proceed

5. Programming the Lower and Upper Limit

d) You will hear "Enter number then press pound"

value.

Use the same amount of precision used for the 4 and 20

The maximum number key presses is six. This includes a star

you will hear "warning" and you will be returned to the Set Limits

(Press 2 to skip to the next programming item and proceed to

To enter a negative value, enter * as the first digit.

g) You will hear the current high limit for the selected sensor (i.e.

as decimal place or minus sign and the pound sign at the end.

80 psi)

place. For instance, to enter the value 1.23, enter 1*23.

a) You will hear the current low limit for that sensor (i.e. 45 psi)

Use the same amount of precision used for the 4 milliamp

step 6.a or press 0 to program a different sensor and return to

If the values you entered in step 4 did not allow the 4-20 mA Sensor

place. For instance, to enter the value 1.23, enter 1*23.

k) Enter the value then press #.

j) You will hear "Enter number then press pound"

h) You will hear "Press 1 to change"

Menu, return to step 1.a

step 1.a)

as decimal place or minus sign and the pound sign at the end.

b) You will hear "Press 1 to change"