vm501_manual 9 | Biblioteca actuadores temperatureguard

programming a pager number.

Programming the Number of Rings

The Temperature Guard Plus answers the telephone line after

You will hear the telephone number you just entered.

7 You will be automatically returned to the Program Menu

6a. For voice phone numbers enter the full phone number (1 +

area code if necessary) followed by the # key.

the programmed number of rings. Valid numbers of rings are

3 You will hear "Press one to change."

3 You will hear "Press one to change"

6 Enter the # key

To program the second, third, and fourth numbers repeat above

dialed: Enter 9,*,5,5,5,1,2,3,4,#

1 From the Program Menu, press 7 to set the number of rings

steps, entering 2, 3, and 4 respectively from the program menu.

1 25.

2 You will hear the telephone number for the selected recipient

2 You will hear the telephone number you selected

outside line, and a delay is needed before the number is

1 Select the appropriate number from the Program Menu

4 Press 1 if you want to make a change or press any other

You will be automatically returned to the Program Menu

3 You will hear "Press one to change"

For example: If an a 9 were required to connect with an

To Delete a Phone Number:

To Change a Phone Number:

2 You will hear the programmed number of rings

(1 + area code if necessary) followed by the # key.

5 You will hear "Enter number then press pound"

button to return to the Program Menu

5 You will hear "Enter number then press pound"

6b. For pager numbers enter * then enter the full pager number

vide a two second delay. Do not enter * for the first digit unless

4 Press 1 to make a change

1 Select the appropriate number from the Program Menu