The Computer Room Guard can place "reminder calls" even after
Reminder Call Delay time, the Computer Room Guard will restart
4 Press 1 if you wish to make a change or press any other button
4 You will hear "Press one to change"
7 Enter the number, followed by a #
9 You will be automatically returned to the Program Menu
procedures.
7 After 4 seconds you will hear the tone again, marking the end
to return to the Program Menu
8 You will hear the message you recorded
6 Begin speaking after the tone. The Computer Room Guard will
local ID message and warning conditions a programmable number
The PIN must be 4 digits and must not include a # sign.
2 You will hear the programmed PIN number
1 From the Program Menu, press *
13
The local identification number is printed on the display of a pager
8 You will be automatically returned to the Program Menu
2 You will hear "Warning Reminder is 1"
7 You will hear the number of rings you entered
12
8 You will be automatically returned to the Program Menu
The Computer Room Guard uses a 4-digit PIN number (0000-
3 You will hear "Press one to change."
Emergency calls have been acknowledged. If reminder calls have
Programming a Reminder Call
when the Computer Room Guard calls a pager number. This
6 You will hear "Enter number then press pound"
6 Enter the number of times (0,1, or 2) that you would like the
number can be up to 20 digits long.
Programming Repeat Warning Messages
of your message
programmed number of rings. Valid numbers of rings are 1 25.
5 You will hear "Enter your PIN number"
1 From the Program Menu, press 7 to set the number of rings
Programming the Number of Rings
4 Press 1 to change or 2 to return to the Program Menu.
3 Press 1 if you wish to enable reminder calls
3 You will hear the programmed number
5 You will hear "Enter number then press pound"
emergency call procedures.
been enabled and an alarm condition is still present after the
7 You will hear the value you just entered
During emergency calls the Computer Room Guard will repeat the
record for about 4 seconds
8 You will hear the number you just entered.
3 You will hear "Press one to change."
2 If this is the first time setup, go to step 6
1 From the Program Menu, press 8 to change the PIN number
5Press 1 to make a change
You will be returned to the Set Limits Menu
8 You will hear the value you just entered
The Computer Room Guard answers the telephone line after the
4 Press 1 if you wish to make a change or press any other button
6 Enter the number of rings, then press #
7 You will hear the PIN number you just entered
button to return to the Program Menu
5 You will hear a tone
9 You will be automatically returned to the Program Menu
12
4 You will hear "Alarm Reminder is ON, callout time delay is XX
2 You will hear the programmed number of rings
Programming a Local Identification Number For Pagers
of times (Default is 1 repetition)
warning message repeated.
5 Press 1 if you wish to make a change or press any other
9
6 You will hear "Enter number, then press pound"
2 You will hear "Alarm Reminder is OFF, Press one to change."
Programming a PIN Number
3 You will hear "Press one to change."
5 You will hear "Enter number then press pound"
7 Enter the time delay in minutes (i.e. 120 for 2 hours)
9999) to identify you when calling the device or during callout
minutes press 1 to change" (Default value is 60 minutes)
6 Enter a four digit number
1 From the Program Menu, press 5 for the local ID
to return to the Program Menu
1 From the Program Menu, press 9
<< < [Pag.12]
Esta version es la html del arhivo pdf computer_room_guard_manual_r6, genearada por domotica.name desde www.temperatureguard.com
Archivos relacionados:AN505E ANDCP-E DCP_Getting_ DCP_IP_Setup DCP_Manual_v DCP_manual IP_Setup_rev MA41201 MA412_Wiring MOLLY303_Wir MOLLY305_Wir NetworkAddre VM500-5_Inst VM500_INSTAL VM500_Mounti VM5032-2002 VM50522 VM505E_510Em VM52002 VaccineRepor ab305v aci-1k-2w-bp aci-1k-2w-sp ma401_wiring ma403 molly303_spe pump_sequenc rl-b_wiring_ vm500-5E-DCP vm500-6wirin vm501_manual vm501_specsh vm502_specsh vm504_manual vm505 vm50518 vm50520 vm5057r14 vm506_manual vm50811 vm508_specsh vm509 vm51001 vm510_specsh vm511_specsh vm54001 vm540lv_wiri actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
