VM50522 9 | Biblioteca actuadores temperatureguard

To enable a Door Sensor Input to go into alarm condition and generate alert

callouts, it must be programmed with a time delay of at least 1 minute.

e) Press 1 to make a change or press any other button to not make a

Programming Door Sensor Inputs

b) You will hear "Enter Sensor Number"

change

Acceptable range is 0 to 900 minutes

g) Enter the time delay in minutes (i.e. 15 for 15 minutes)

d) You will hear "Door Input 1 callout time delay is xx minutes press 1 to

You will be returned to the Set Limits Menu

change". Default is 0 minutes (disabled)

An entry of 0 will disable the Door Sensor Input

h) You will hear the value you just entered

You will hear "Enter number then press pound"

Input 2.

To return to the Main Menu press 0

c) Enter 9 to program Door Sensor Input 1 or * to program Door Sensor

a) From the Main Menu, press 2 to set Limits