VM5032-2002 9 | Biblioteca actuadores temperatureguard

4. Press 1 if you want to make a change or press any other

First Time Number Programming:

6b. For pager numbers enter * then enter the full pager num-

2 for the secondary number, 3 for the third number

and Home Guard products. In this section they will be referred to as

just entered.

area code if necessary) followed by the # key.

Monitor.

(Temperature Guard only), or 4 for the fourth number

Programming Telephone/Pager Numbers

4. You will hear "star" and then the telephone number you

7. You will hear the telephone number you just entered.

5. You will hear "Enter number then press pound"

1. Select the appropriate number from the Program Menu

1. From the Program Menu, Select 1 for the primary number,

ber (1 + area code if necessary) followed by the # key.

(1 + area code if necessary) followed by the # key.

To Change a Phone Number:

until someone enters the PIN number. If Temperature Guard reaches

5. You will be automatically returned to the Program Menu

(Temperature Guard only).

3. You will hear "Press one to change"

an answering machine, it will leave the personal identification message,

3b. For pager numbers enter * then enter the full pager number

2. You will hear "Enter number then press pound"

3a. For voice phone numbers enter the full phone number (1 +

ent

pager numbers. The Temperature Guard will call each phone number

steps, entering 2, 3, and 4 respectively from the program menu.

To program the second, third, and fourth numbers repeat above

8. You will be automatically returned to the Program Menu

The Temperature Guard stores up to four (4) emergency telephone or

area code if necessary) followed by the # key.

This section contains information that applies to both the Temperature

6a. For voice phone numbers enter the full phone number (1 +

2. You will hear the telephone number for the selected recipi-

and then the alarm condition, but will continue calling.

button to return to the Program Menu