NetworkAddressSetupUsingARP 2 | Biblioteca actuadores temperatureguard

WITHOUT A RETURN TO THE FACTORY.

command> telnet <good ip> 9999

Enter the 4 octets of the Good IP address.

You will see:

DCP-E/MOLLY Security Manual ANSECURITY.pdf)

9 Save and exit

number of bits to represent the host part (zero's) of your Subnet Mask.

Enter the 4 octets of the Gateway IP Address.

Press 9 to "Save and exit"

Press Y to "Set Gateway IP Address?"

0 Server

8 Exit without save

TECHNICAL SUPPORT. CHANGES IN THIS MENU CAN RENDER YOUR DEVICE UNUSABLE

Configuring Network Parameters via Telnet

Enter 0.

Press Enter

DO NOT CHANGE ANY OTHER SETTINGS WITHOUT REFERRING TO TEMPERATURE GUARD

6 Security

For the Netmask (Subnet Mask) enter 8 for a Class C address (255.255.255.0) or any other

7 Defaults

Change Setup:

Your choice ?

MAC address 00204A******

it easier to locate in your DHCP server device list)

Enter N to leave telnet config password as is. (To configure the security of your Device, see the

5 Expert

1 Channel 1

Software version V6.1.0.0 (051122) XPTEXE

Enter N to leave the DHCP device name as is. (Enter Y to configure the DHCP device name to make

Press Enter for Setup Mode

[List of current settings]

3 E-mail