Amber
Test Communications
Off
Amber
Color
10 Mbps
Half-Duplex
Verify that the Temperature Guard is powered on from its power supply.
No Temperature Guard devices are found on the network
Green
Verify that the LEDS on the LAN adaptor are on as described below, if not recycle power by pulling out
100 Mbps
answers to your questions.
Your Network Administrator should be able to verify this for you. To test that port 10001 is not blocked, use the
Meaning
Temperature Guard device, the Test Communication function is available.
No Activity
Link LED (Left Side) Activity LED (Right Side)
Meaning
1. Select Test Communication from the Advanced Menu
your computer or by a hardware firewall.
Verify that the network has a DHCP server and that ports 10001 (2711h) and 30718 (77FEh) are not blocked on
4. IP Setup will attempt to communicate with the device at that address. Results will be displayed.
Check the simple things first
the power jack from the Temperature Guard.
is the address of one of our devices located at Temperature Guard.
2. If you have selected a device from the list and would like to Test Communication to it click Yes to the
To verify that port 10001 is successfully opened in your firewall or to verify general data functionality of the
Verify that you connected a good Ethernet cable to the Temperature Guard.
ping xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is IP address you gave the device.)
Off
Troubleshooting
Green
No Link
Pull the power jack from the Temperature Guard, wait a couple of seconds, plug it back in and try to find the
Problem
Temperature Guards again. If that does not work, try the items below.
3. If you haven't selected a device from the list to test or selected No from the "Test This Device?" prompt,
The simple things check out OK, now check
Color
Test Communication function in the Advanced menu and supply an IP Address: microtechct.dyndns.org which
Verify that IP address can be reached from your computer by opening a command prompt and entering
5. If communication fails, verify that the IP address is correct for the device.
enter the IP address of the Temperature Guard device you wish to test.
Full-Duplex
"Test This Device?" prompt. If you would like to test communication to another IP address click No.
<< < [Pag.3]
Esta version es la html del arhivo pdf IP_Setup_rev_4, genearada por domotica.name desde www.temperatureguard.com
Archivos relacionados:AN505E ANDCP-E DCP_Getting_ DCP_IP_Setup DCP_Manual_v DCP_manual MA41201 MA412_Wiring MOLLY303_Wir MOLLY305_Wir NetworkAddre VM500-5_Inst VM500_INSTAL VM500_Mounti VM5032-2002 VM50522 VM505E_510Em VM52002 VaccineRepor ab305v aci-1k-2w-bp aci-1k-2w-sp computer_roo ma401_wiring ma403 molly303_spe pump_sequenc rl-b_wiring_ vm500-5E-DCP vm500-6wirin vm501_manual vm501_specsh vm502_specsh vm504_manual vm505 vm50518 vm50520 vm5057r14 vm506_manual vm50811 vm508_specsh vm509 vm51001 vm510_specsh vm511_specsh vm54001 vm540lv_wiri actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
