DCP_Manual_ver_4_0_4 5 | Biblioteca actuadores temperatureguard

You can create and print out charts for any sensor that Data Capture has collected data. The charts are

4. Select whether to generate a graph or export the data to a CSV file.

3. Select the starting and ending dates on the two calendars.

locate them.

1. Click on the Reset button to set the correction factors to 0.

Performing Calibration

the drop down list, select the sensor you want to generate a report for. If the log files are located in

the Enter Alarm Resolution button, type in the comment and click Save.

Alarm Events and Resolution Entry

2. A drop down list is filled with all of the available log files in the Temperature Guard directory. From

a directory other than the Temperature Guard directory, click on the Browse For Log Files... to

1. Click on DCP Graphing in the Temperature Guard program directory.

Generating Charts with DCP Graphing

1. Click on the Reset button to set the correction factors to 0.

2. DCP will download and display all sensor parameters.

5. Click on the Go button.

Field Calibration for Molly303 (firmware rev 5 and above)

the sensor data. The current temperature reading will reflect the new correction factor.

3. Once the sensor parameters are downloaded, click on the Cal button.

3. Click on the Store Correction Factors button. DCP will upload the correction factors and then refresh

Guard directory.

1. Right click on the Temperature Guard Server and select Edit Sensors.

2. Enter the actual temperature obtained from a calibrated source.

To view alarms, click on the Events menu item. Alarms are displayed in the large text box in descending order

and can be scrolled through using the scroll bar beneath the text box. To add a resolution comment, click on

generated from binary data files that can not be altered or tampered. All log files are stored in the Temperature

Molly303 can be field calibrated at a single point.

Resetting the correction factor