standard rate of 30k PPS. Normally the DEFAULT rate will never be changed since
Since disk drives are relatively slow, Merlin tries to cache as many Images as possible.
load with Image files. The number will vary depending on the amount of XMS memory
MERLIN MANUAL
VERSION 5.1
xxxxx PPS
loaded from the disk as needed during the running of Merlin.
This status entry Shows the number [xxxx] of available Image cache entries for Merlin to
Status Bar
xxxx Available Image Cache Entries
scanning rates can be adjusted in the Images: Point Editor menu.
Page 9
supported by your system. Approximately 25 Images can be cached per megabyte of
All information contained within is confidential and © Technological Artisans, Inc. 2005-2007
Shows the Points Per Second display rate for Merlin. This readout will display the default
memory. In reality, Merlin can never run out of memory since Images not cached will be
<< < [Pag.9] > >>
Esta version es la html del arhivo pdf MerlinManual51, genearada por domotica.name desde www.taiserver.com
Archivos relacionados:Merlin_Manua ScanCatManua skymanmanual actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
