smartvue_s4_userguide 9 | Biblioteca seguridad smartvue

1.6

Smartvue S4 is designed to work in most countries but may have special power requirements in

and maintenance instructions should be followed. Follow all warnings and important

Internet Explorer, under the TOOLS menu option select INTERNET OPTIONS, select

searching for information on a specific procedure or feature. Refer to the Index at the end of this

your country. Please contact the organization which you purchased from for more information.

notes in this guide. The instructions should be retained for future reference.

support playback of H.264 video and use the Securevue USB security key functions. In

1.1

Using this Guide

Safety Instructions and Other Notices

· IMPORTANT NOTE: Your web browser must have support for ACTIVE X enabled to

Chapter 1 Introduction

· Smartvue requires a Personal Computer with the following:

Requirements

1.4

settings are either set to ENABLED or PROMPT.

one of the world's leading IP video solution companies. To maximize the performance of your

Warranty and Liability

The electric power frequency in any country is measured in the number of hertz (cycles per

Microsoft Windows 2000 or XP or Apple OS

1.2

For information on product warranty and liability, please see the Warranty section in this guide.

Internet Explorer, Firefox, Safari, or Netscape

Worldwide Compatibility

1.3

Thank you for selecting visual business intelligence technologies from Smartvue Corporation,

1. Instructions All instructions should be read before operating the product. All operating

1.2GHz Pentium or higher processor

second). In countries which use 50hz, the cameras should be set to PAL and in 60hz countries

At least 512MB RAM

the cameras should be set to NTSC (see Camera Settings).

guide for additional information.

1.5

Smartvue solution, we recommend that you read this guide and follow the instructions.

Internet Explorer 6.0 or higher

Welcome

All major sections and subsections are listed in the Table of Contents. Use this table when

SECURITY, then click on CUSTOM LEVEL and check to insure that all ACTIVE X