networking may not be required. To find out how to use the Smartvue S4 camera in wired mode,
Resetting the camera will erase all settings from the camera and the camera will need to be re-
In the case where a camera reset is required, use the Reset function to return the camera to its
background image
20
the camera directly. The Power Input is where the power adaptor is connected to the camera.
original factory configuration. While the camera is powered on, slide a paper clip into the small
please see the section Wired Camera Setup.
The Network Port is used to connect the camera to a network where the integrated wireless
Camera Reset
5.3
hole at the bottom of the camera where the reset button is located and press it three (3) times.
Out is analog video and uses an RCA jack to connect to a monitor to give you a live view from
connected to the DVM. A reset is required to re-associate a camera with a DVM.
<< < [Pag.20] > >>

Esta version es la html del arhivo pdf smartvue_s4_userguide, genearada por domotica.name desde www.smartvue.com

Archivos relacionados:smartvue_200 smartvue_200 smartvue_bro smartvue_cin smartvue_com smartvue_com smartvue_con smartvue_edu smartvue_h26 smartvue_hom smartvue_mus smartvue_mus smartvue_per smartvue_por smartvue_por smartvue_res smartvue_ret smartvue_ret smartvue_rey smartvue_s4_ smartvue_s4_ smartvue_s6_ smartvue_s8 smartvue_sec smartvue_sen smartvue_spe smartvue_tra smartvue_uni smartvue_vbi smartvue_wir seguridad cctvsafe extremecctv freezealarm goodbarsecurity highpowersecurity icontrol infosecinstitute intamac jacksonsystems keepsafer mraccess napcosecurity nexusaudiosystems securityandmore securitymaninc smartvue techno-mall tripplite vigitron vikingelectronics wilife