smartvue_s4_userguide 19 | Biblioteca seguridad smartvue

Camera Setup

Camera Placement

at its Power Input. The power indicator light will illuminate green on the front of the camera, then

Chapter 5 Wireless Camera Setup

On the back of the camera the Mounting Adapter allows you to mount the camera to a wall or

the light will turn red until it establishes a connection to the DVM.

Before placing camera(s) in their desired locations, place them in the same room as the DVM

attach the wall mount to a wall with the included screws then attach the camera. To mount the

camera is not connected to a DVM. Yellow means it is in the connection or upgrade process

the camera on any bookshelf or flat surface and adjust the tilt (up and down direction) of the

plugged directly into a network. Please see the next chapter for more information.

Plug the camera power cable into an outlet then plug the connecter into the back of the camera

and green means it is connected and communicating with a DVM.

5.1

5.2

camera to a drop ceiling, use the drop ceiling mount then attach the camera to the mount. Be

ceiling using any standard mounting hardware or the included hardware. The Composite Video

To place the camera on a shelf or flat surface, slide the camera into its shelf stand then place

stand as needed by adjusting the screw on the bottom of the stand. To wall mount the camera,

cause damage to the camera.

for initial setup. Smartvue S4 cameras can be placed extended distances away from the DVM,

careful to attach the mount to the wall or ceiling securely so the mount will not dislodge and

will significantly impact camera distance.

The indicator light on the front of the cameras indicates the camera's status. Red means the

depending on the environment and number of cameras used. Metal reinforced walls and floors

If the distance is too far for the camera to reach the DVM, Smartvue S4 cameras can be