dvr04_manual 9 | Biblioteca seguridad securitymaninc

30,15,10,7,5,4,3,2,1 frames per second.

5.6 Video Quality

the system only record CH3 and CH4 video.

· "M" Motion Triggered

will not record video until the sensor is triggered and

means more smooth movement and uses more hard disk space. System default value is 30 fps, that

CH2", "

Quad"

Setup video record method by time, sensor triggered and motion triggered.

fied period of time.

There are two modes for video recording.

more hard disk space.

The DVR cooperates with many kinds of external

Select"

Down" :Move the prompt

the output signal notifies the DVR during this speci-

DVR system.

Up", "

to switch channel display when viewing recorded video.

Press "

· "-" No Record

21 24

The record frame rate, record quality, and hard disk space will affect the total recording time of the

5.7 Record Schedule

Quad Mode

12 15 18

There are three levels of video quality for recording, High, Normal and Low. Higher quality uses

means the system will record 30 frames per second. The frame rate value can be set to

5.5 Record Frame Rate

Each Mode

5.4 Record Mode

+TTTMTMTMTTTMTTMTTTSSS+

video to full screen display. For example, user can turn off record function of CH1 and CH2 to have

sensor equipment like PIR and gas sensor. The DVR

Button function:

DVR Setup

· "T" Continuous (System Default)

Compress and record each channel video separately, therefore, user can enlarge single channel

CH3", "

CH4" ,"

to full screen. User cannot use the each mode record in this mode.

· "S" Sensor Triggered

:Select method

The record frame rate will affect the movement of an object in the recorded video. More frames

CH1", "

Compress and record all 4 channel video into one file, therefore user can not enlarge single channel