manual_thinline_200_us 9 | Biblioteca motores plasma-tv-lift

established. Most up-to-date video projectors feature this output and can thereby control the Beamer Lift.

Assembly of the trigger control

Image 1

Black

motor cabel

(4 x 0,75)

Brown

4) Connect all components to the mains voltage.

green LED will go out (P.10 Img.3 No.2). Now, please press the upper button on the left side of the

4) Re-connect the mains power supply.

C.05:

3) Establish the cable connection (P.10 Img.3)

TRIGGER CONTROL

3) Establish the cable connection (Img.2) and connect the 12V trigger input to the projector.

TRIGGER CONTROL

Operating Manual

1) Disconnect the projector und Projector Lift from the mains voltage.

O utperf orm. O utl ast.

Blue

Image 2

2) Attach the radio receiver in the suitable position.

mains cord

hand-held transmitter; then, the LED will first blink 3-4 times and then remain lit.

12V DC

(3 x 1,5)

INITIAL PRODUKT SET U

Brown

5) Press and hold down the ,,Program" button (P.10 Img.3 No.1) with an insulated tool for one second. The

P.09

2) Assemble the casing which accepts the trigger control in the suitable position.

1) Disconnect the beamer and the Projector Lift from the mains voltage.

Assembly of the radio controller

With the included trigger control (Img.1), the Projector Lift is extended, as soon as a 12V DC voltage is