Image 5
area, so that the Flatlift Slimline does not make contact with any obstructions.
Outperf orm.
Outlast.
4. Connect the control box (
7. Due to insurance purposes, your Flatlift Slimline is equipped with an automatic safety device. This me-
3. Connect the 24V mains adaptor (
C.04:
2. Connect the limit switch to the control box (
Image 6
image 6, No. 7).
8
the Slimline. Please consider planning a revision recess (see chapter 5, page 10).
Operating Manual
6
Minus (-)
the polarity (
7
image 6, No. 7) to the control box (image 5, No. 8). Please observe
5
image 5, No. 6).
1.Connect the motors to the control box (
Electrical connection:
9
the button is no longer pressed, the Slimline system stops.
INITIAL PRODUKT SET U
image 4, No. 5). Now, you may connect the motors to the con-
background image
P.09
trol box. There is no connection sequence to be observed.
10
ans that the button for opening and closing the system has to be pressed permanently. As soon as
Image 4
5. Now, please store the control box and the mains adaptor in the suspended ceiling or in a free area of
(+) Plus
image 4, No. 9) and the 24V mains adaptor (image 6, No. 10) to the mains
INITIAL PRODUKT SET UP
6. Open and close your Flatllift Slimline once without the TV. In doing so, please observe a free pivoting
supply.
<< < [Pag.9] > >>

Esta version es la html del arhivo pdf manual_slimline_65_us, genearada por domotica.name desde www.plasma-tv-lift.com

Archivos relacionados:manual_30_42 manual_43_50 manual_Pop_U manual_Pop_U manual_Pop_U manual_Pop_U manual_Pop_U manual_Pop_U manual_Pop_U manual_Pop_U manual_Pop_U manual_Pop_U manual_frame manual_frame manual_lidom manual_lidom manual_lidom manual_light manual_sliml manual_sliml manual_super manual_thinl manual_thinl manual_thinl manual_thinl manual_thinl motores activateddecor aquaair-wetdry auton avrak closystems endlesspools hpproducts.net innovativepools mediadecor peerlessmounts plasma-tv-lift silentgliss-usa somfysystems watercop