manual_frameolift_60_us 9 | Biblioteca motores plasma-tv-lift

1) Use the cables (red, blue and green (the colours can

PRODUCT CONTROL

O utperf orm. O utl ast.

relay outputs (control command: lower Flatlift).

INITIAL PRODUCT SET U

(24V 2A) with potential free contacts. These relays

PRODUCT CONTROL

You can connect your Flatlift to a room control

Connection to a room control system:

must be actuated for a programmable time period.

relay output (lift Flatlift).

Image 1

be different) from the image 1.

Image 2

output and also attach the green cable to this

Operating Manual

P.09

Solder side plug

system (image 2) if this system has 2 relay outputs

C.05:

3) Bridge the blue cable onto the second relay

2) Now connect the blue and red cable to one of the