manual_Pop_Up_46-50_gold_us 9 | Biblioteca motores plasma-tv-lift

Image 2

image 1.

P.09

relay output (lift Flatlift).

You can connect your Flatlift to a room control

relay outputs (control command: lower Flatlift).

actuated for a programmable time period.

C.05:

Connection to a room control system:

system (image 6) if this system has 2 relay outputs

output and also attach the green cable to this

O utperf orm. O utl ast.

PRODUCT CONTROL

Image 1

INITIAL PRODUCT SET U

with potential free contacts. These relays must be

Operating Manual

2) Now connect the blue and red cable to one of the

PRODUCT CONTROL

3) Bridge the blue cable onto the second relay

1) Use the cables (red, blue and green) from the