manual_Pop_Up_30_42_platinum_us 9 | Biblioteca motores plasma-tv-lift

image 1.

1) Use the cables (red, blue and green) from the

relay outputs (control command: lower Flatlift).

C.05:

Connection to a room control system:

Image 1

INITIAL PRODUCT SET U

relay output (lift Flatlift).

2) Now connect the blue and red cable to one of the

with potential free contacts. These relays must be

O utperf orm. O utl ast.

actuated for a programmable time period.

P.09

PRODUCT CONTROL

You can connect your Flatlift to a room control

Operating Manual

output and also attach the green cable to this

PRODUCT CONTROL

system (image 6) if this system has 2 relay outputs

3) Bridge the blue cable onto the second relay

Image 2