manual_Pop_Up_30-42_silber_us 9 | Biblioteca motores plasma-tv-lift

the lid solution again at a later

O utperf orm. O utl ast.

ensure that it doesn't collide with

the Flatlift system accordingly to

Operating Manual

The A/V installer which is ins-

talling the Flatlift thus enjoys

tilted using the side hand wheels

tilted, please remember to set up

Lid variation 1:

which opens automatically when

3) Bridge the blue cable onto the second relay

TV tilting:

actuated for a programmable time period.

the Flatlift moves upwards.

flexibility and can also change

relay output (lift Flatlift).

rear section of the unit incor-

PRODUCT INTEGRATION

the cover closes softly thanks to

If you want the TV set to be

system (image 6) if this system has 2 relay outputs

PRODUCT CONTROL

PRODUCT INTEGRATION

porating spring damped hinges

The TV can naturally also be

Image 2

2) Now connect the blue and red cable to one of the

the spring dampened hinges.

the case when moving.

time. When the Flatlift retracts,

relay outputs (control command: lower Flatlift).

A lid closing mechanism on the

with potential free contacts. These relays must be

image 1.

output and also attach the green cable to this

P.09

Image 1

C.06:

Different lid closing solutions are

by up to 15° (Image 2).

Connection to a room control system:

1) Use the cables (red, blue and green) from the

sation of the project (image 1).

You can connect your Flatlift to a room control

available depending on the reali-