manual_Pop_Up_30-42_gold_us 9 | Biblioteca motores plasma-tv-lift

Image 2

PRODUCT CONTROL

relay output (lift Flatlift).

actuated for a programmable time period.

P.09

1) Use the cables (red, blue and green) from the

image 1.

Connection to a room control system:

Image 1

O utperf orm. O utl ast.

2) Now connect the blue and red cable to one of the

C.05:

You can connect your Flatlift to a room control

INITIAL PRODUCT SET U

with potential free contacts. These relays must be

Operating Manual

relay outputs (control command: lower Flatlift).

3) Bridge the blue cable onto the second relay

system (image 6) if this system has 2 relay outputs

PRODUCT CONTROL

output and also attach the green cable to this