UPStart Configuration
is highly recommended that you keep this as "N.O. Link
Transmit Channel #2:
or wait five minutes for it to time out.
the TCM in SETUP mode. To do this, press the Program
Suspend Links:
date of purchase. Refer to the warranty information on the
Status LED will blink red to indicate that factory defaults have
materials and workmanship for a period of five years from the
Unit ID:
stored configuration settings without further user intervention.
Factory Default Settings
On the Transmit Components tab, select one link to be
Network Password:
Link #1 Activate
free software (UPStart) to help you configure all of your
TCM.
mode and then press the Program Button 10 times rapidly. The
disabled (suspended) by a UPB Link command received by
37
OPERATION
received for the specified link and activated when an
Button (see illustration) 5 times rapidly. The Status LED will
and select a Sense Mode that you desire. Note: for the TCM it
continuously blink Blue when the device is in SETUP mode.
Add menu item in the UPStart Setup Software.
PulseWorx Lighting System devices. User's Guide (available
Link to control the sensing channel. The channel will be
Link, select the Receive Components tab and specify the
CONFIGURATION
To exit SETUP mode, press the Program Button 2 more times
PulseWorx website (www.PulseWorx.com) for exact details.
ACTIVATE or GOTO > 0% command is received.
controlled for each channel.
Step 5: Specify a Suspend Link (optional)
how to configure your system using the UPStart software.
The Inventors Of:
All Unused
Installation Guide and
Step 1: Add the TCM to your UPB Network
Link #2 Activate
Whenever the telephone rings the TCM will transmit the
control.
Device
Once you have specified the desired configuration, press the
sales@pcslighting.com www.pcslighting.com
1234
19201 Parthenia St. Suite J
suspended when a DEACTIVATE or GOTO 0% command is
SETUP Mode
UPStart will find your TCM and allow you to name it.
configured UPB command onto the powerline.
To restore the following default settings put the TCM into SETUP
Northridge, CA 91324
Transmit Components tab to begin configuring what to
Add the TCM to your UPB Network by selecting the
Once installed and configured your TCM will operate on the
on the PulseWorx web site: www.PulseWorx.com) explain
(Phone) 818-701-9831 (Fax) 818-701-1506
been restored. Press the Program Button 2 more times to stop
A sense channel can be configured to be enabled (active) or
applicable instructions, to be free from original defects in
Network ID:
On the Transmit Components tab, press the Mode button
PCS has developed a Powerline Interface Module (PIM) and
Telephone Control Module
Follow the steps described below to configure your TCM:
Double-click the TCM icon to begin configuration. Select the
the blinking.
LIMITED WARRANTY
255
Seller warrants this product, if used in accordance with all
When configuring a UPB system, it will be necessary to place
the TCM. To configure a sense channel to be controlled by a
Step 2: Start TCM Configuration
Owner's Manual
Step 4: Specify the Sensing Mode
Step 3: Specify the Link(s) to Control
Program Device button to program the information into the
Activator".
Step 6: Program the TCM
Transmit Channel #1:
Model: TCM
< [Pag.2]
Esta version es la html del arhivo pdf TcmOwnersManualv2.0, genearada por domotica.name desde www.pcslighting.com
Archivos relacionados:CEC-500-2007 INSTEONCompa Keypad_membr National_Tra Newsletter2 OcmOwnersMan SMST8-Manual UPB_Plugin UPB_Technolo X10ToUPB_V1. dtfeb00 jeitler jeitler_home po-kpcw6 po-tst_1 royrobinetmc smst6 upb xp1ls600_100 actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
