If you forget to shut the load off yourself then the output
Network ID:
Once your OCM is installed it can be configured either
Receive Components:
(Channel #1)
New for Generation 2 is the ability to set a maximum on time.
1234
Although the factory default operation of the OCM is useful
Modules, Approved Third-Party Controllers and touch
commands sent by UPB controllers.
OPENED locally. To enable the TEST mode press and hold the
TEST Mode
Owner's Manual
defaults have been restored. Press the Program Button twice
·
·
Unit ID:
Factory Default Settings
available on the PulseWorx web site: www.PulseWorx.com to
Configuration Guide available on the PulseWorx website
automatically turned the load off. This allows the OCM to
·
rapidly. The Status LED will blink red to indicate that factory
in many situations, it is highly recommended that your device
(Phone) 818-701-9831 (Fax) 818-701-1506
Link #8 = Blink @ 0.5 secs
The OCM is perfect for controlling:
Seller warrants this product, if used in accordance with all
Valves
TEST mode.
Anything that is controlled by a relay.
be configured with the UPStart Setup Software so that you
Link #1 = 100% (CLOSED)
19201 Parthenia St. Suite J
module will do it for you automatically. The OCM can be
Link #8 = Blink @ 0.5 secs
such as LEDs.
Link #2 = 0% (OPENED)
remotely control other devices or update feedback indicators
Program Button on the OCM for at least three seconds. The
can take advantage of its many configurable features.
double-tapping the Program Button. Press and hold the
Manual configuration can be used to add your OCM device
materials and workmanship for a period of five years from the
Controllers, Timed Event Controllers, Wall Switches, Interface
configured to inform the rest of the network when it has
compatible transmitter such as PulseWorx Keypad
will continuously blink Blue when the device is in SETUP
Program Button again for at least three seconds to exit from
Network Password:
Program Button. Lamp #2 can be CLOSED and OPENED by
more to stop the blinking.
Gates
PulseWorx website (www.PulseWorx.com) for exact details.
SETUP mode and then press the Program Button ten times
The Inventors Of:
To restore the following default settings place the OCM into
A large high voltage contactor
·
or wait five minutes for it to time out.
SETUP Mode
Button (see illustration) five times rapidly. The Status LED
Pumps
preset relay states. Refer to the Keypad Controller's Manual
When configuring a UPB system, it will be necessary to place
Receive Components:
Installation Guide and
into a UPB network, link it to controller buttons and change
(Channel #2)
Output Control Module
255
mode. To exit SETUP mode, press the Program Button twice
manually or with the UPStart Setup Software.
PulseWorx Lighting System devices. User's Guides are
date of purchase. Refer to the warranty information on the
PCS has developed a Powerline Interface Module (PIM) and
Gas fireplaces
Status LED will blink Magenta to indicate TEST mode. Relay #1
AUTO-OFF Timers
(OPEN or CLOSED) for each scene.
TYPICAL USES
can now be CLOSED and OPENED by single-tapping the
The OCM can accept powerline commands from any UPB-
The Output Control Module operates according to
A manual test feature allows the relay to be CLOSED and
screens. Each channel of the OCM can be a member of up to
Link #1 = 100% (CLOSED)
Garage Doors
16 scenes with the capability to store a pre-set relay state
·
free software (UPStart) to help you configure all of your
applicable instructions, to be free from original defects in
sales@pcslighting.com www.pcslighting.com
(www.PulseWorx.com) for more details.
explain how to configure your system.
Northridge, CA 91324
Model: OCM
the OCM in SETUP mode. To do this, press the Program
·
LIMITED WARRANTY
06
CONFIGURATION
·
OPERATION
Link #2 = 0% (OPENED)
< [Pag.2]
Esta version es la html del arhivo pdf OcmOwnersManualv2.0, genearada por domotica.name desde www.pcslighting.com
Archivos relacionados:CEC-500-2007 INSTEONCompa Keypad_membr National_Tra Newsletter2 SMST8-Manual TcmOwnersMan UPB_Plugin UPB_Technolo X10ToUPB_V1. dtfeb00 jeitler jeitler_home po-kpcw6 po-tst_1 royrobinetmc smst6 upb xp1ls600_100 actuadores activethermal airwaysystem automatedceilingregisters coolcomponents easywarmfloor heatizon numinus pcslighting relampit taiserver temperatureguard touchplate warmzone
