Input current
to AC source outlet
the cord forcibly can damage the cord and consequently cause a fire or
and the AC wall outlet. Ensure that the green "Output Present" LED is on.
ˇ If you detect smoke or unusual smell, turn the computer off and unplug
Specifications
Output current
4.7 x 2.7 x 1.7 inches
ˇ If you detect smoke or unusual smell, turn the computer off and unplug
output jack.
Troubleshooting
ˇ Never attempt to plug or unplug the power plug or the connector of the
1. Firmly plug the snap-in connector of the DC output cable into AC adapter
5. Confirm that the green "Output Present" LED is on and that the
standards.
and the AC wall outlet. Ensure that the green "Output Present" LED is on.
AC adapter is now supplying power to the device.
ˇ Ensure that power is supplied to your AC wall outlet.
the power plug immediately. Contact a Lind service representative.
Weight
following:
AC adapter when your hands are wet. An electric shock may result.
+/-5% maximum
1.5 amperes maximum
For service, Contact:
LED
-40ēC to +40ēC
Input voltage
You can now use your system with external power supplied by the AC adapter.
connector of the laptop and that the snap-in connector is firmly seated
Environmental
when handling and mounting the adapter. Do not cover or restrict airflow
particularly when operating in high ambient temperatures. Use caution
3. Plug the AC power cord into the AC adapter.
electric shock.
+/-5% maximum
1. Firmly plug the snap-in connector of the DC output cable into AC adapter
Figure 1
90 - 264 volts AC
22 ounces
AC power cord to adapter
Ripple & noise
ˇ Never attempt to plug or unplug the power plug or the connector of the
connector on the electronic device.
If the AC adapter is not supplying power to your computer, check the
ˇ The metal case of the adapter can get quite warm during normal use,
ˇ Do not damage, stretch, or excessively bend the power cord. A fire or
ˇ In the event of failure, contact a Lind service representative.
Figure 1
voltage need not be changed with a transformer or the like.
Ripple & noise
2. Plug the connector of the DC output cable into the mating DC input
Operating ambient temperature*
Input current
ˇ The rated input voltage is between 90 VAC and 264 VAC. The input
voltage need not be changed with a transformer or the like.
47-63 hertz
cable to device
ˇ The metal case of the adapter can get quite warm during normal use,
*Operation below 0ēC may result in higher ripple voltage until adapter has warmed.
When using the Lind ruggedized AC adapter, follow the precautions below.
Caution
Troubleshooting
Frequency
connector on the electronic device.
You can now use your system with external power supplied by the AC adapter.
ˇ When using the AC adapter use a power cord conforming to local safety
Operating ambient temperature*
See adapter label
Green
AC adapter when your hands are wet. An electric shock may result.
electric shock.
ˇ Do not damage, stretch, or excessively bend the power cord. A fire or
following:
2. Plug the connector of the DC output cable into the mating DC input
Storage temperature
ˇ Never attempt to disassemble or modify the AC adapter.
4.7 x 2.7 x 1.7 inches
Connecting the AC Power Adapter
electric shock may result.
Load regulation
*Operation below 0ēC may result in higher ripple voltage until adapter has warmed.
in the AC adapter.
AC power cord
around adapter in any manner. Excessive adapter temperature may result.
ˇ Never use a multi-plug adapter to plug multiple power plugs in the
Snap-in output cable to adapter
5 - 95% non-condensing
standards.
to AC source outlet
-40ēC to +40ēC
Lind Electronics, Inc. #800-659-5956 or #952-927-6303
4. Plug the outlet end of the AC power cord into your AC wall outlet.
Weight
same outlet. If it is used, a short circuit or electric shock may result.
See adapter label
AC power cord to adapter
LED
1.5 amperes maximum
Load regulation
Snap-in output cable to adapter
Storage temperature
This connection sequence may be altered without an effect on operation.
ˇ When unplugging the power plug, grasp the plug, not the cord. Pulling
Input voltage
Specifications
Caution
cable to device
5. Confirm that the green "Output Present" LED is on and that the
ˇ Ensure that the DC power cord is firmly seated in the DC input
See adapter label
-40ēC to +85ēC
Operating relative humidity
when handling and mounting the adapter. Do not cover or restrict airflow
-40ēC to +85ēC
ˇ Ensure that the DC power cord is firmly seated in the DC input
the power plug immediately. Contact a Lind service representative.
Size
Connect output
22 ounces
See adapter label
To connect the AC adapter to your system: (Reference: Figure 1)
the cord forcibly can damage the cord and consequently cause a fire or
ˇ In the event of failure, contact a Lind service representative.
When using the Lind ruggedized AC adapter, follow the precautions below.
AC power cord
ˇ Ensure that the AC power cord is firmly plugged into the AC adapter
in the AC adapter.
Operating relative humidity
ˇ Ensure that the AC power cord is firmly plugged into the AC adapter
ˇ Ensure that power is supplied to your AC wall outlet.
particularly when operating in high ambient temperatures. Use caution
To connect the AC adapter to your system: (Reference: Figure 1)
47-63 hertz
electric shock may result.
90 - 264 volts AC
This connection sequence may be altered without an effect on operation.
Environmental
Connecting the AC Power Adapter
For service, Contact:
connector of the laptop and that the snap-in connector is firmly seated
Lind Electronics, Inc. #800-659-5956 or #952-927-6303
around adapter in any manner. Excessive adapter temperature may result.
Output voltage
Output current
Connect output
ˇ When using the AC adapter use a power cord conforming to local safety
Frequency
same outlet. If it is used, a short circuit or electric shock may result.
AC adapter is now supplying power to the device.
ˇ Never use a multi-plug adapter to plug multiple power plugs in the
If the AC adapter is not supplying power to your computer, check the
ˇ The rated input voltage is between 90 VAC and 264 VAC. The input
3. Plug the AC power cord into the AC adapter.
4. Plug the outlet end of the AC power cord into your AC wall outlet.
Size
2% maximum
Output voltage
Green
output jack.
5 - 95% non-condensing
ˇ When unplugging the power plug, grasp the plug, not the cord. Pulling
ˇ Never attempt to disassemble or modify the AC adapter.
2% maximum
< [Pag.2]
Esta version es la html del arhivo pdf TECH_Rugged_ACAdapt, genearada por domotica.name desde www.lindelectronics.com
Archivos relacionados:EVEREST LindProductO TECH_Adapter TECH_Airline TECH_AluminA TECH_LindLit TECH_Manual_ TECH_Manual_ TECH_Manual_ TECH_Manual_ TECH_Manual_ TECH_Manual_ TECH_Plastic TECH_Ruggedi TECH_Shut_Do TECH_Small_A TECH_Warrant audio acousticmagic acousticsfirst amina aperionaudio audiocontrol audioquest audioshare.net auralex bowers-wilkins bryston.ca caryaudio casatools cascadeaudio chillsound conextionsystems definitivetech eliteavdist furmansound lindelectronics martinlogan monitoraudiousa mseaudio nilesaudio noble-fidelity phasetech psaudio puristaudiodesign qsonix russound sheersoundcable sherbourn sonance ticcorp triadspeakers truaudio vdn-otl
