Input voltage range:
Low Battery Voltage disconnect delay:
· LED indicator for Timing.
WHITE-RODGERS #70-1112252
>18[36]Volts
Specifications are listed for 12 VDC input systems
damage due to low or high input voltage as experienced with alternator failure or improper
Email: The Americas, Far East, Australia contact: LrLind@lindelectronics.com
200A WHITE-RODGERS #586-10511
discharge by shutting OFF loads a preset time after the engine is shut down or when the battery
vehicles or when the vehicle may be idling for long periods with heavy electrical loads.
®
www.lindelectronics.com
150A TYCO ELECTRONICS #V23132-A2001-A100
· High voltage shut down at 18 [36] VDC with auto reset.
Mobile Computing
80A
· Optional activation by ignition switch connection.
Toll free 1-800-659-5956
for
9-18[18-36] V
Lind Ruggedized Timer/Relay Driver
<10.5[21] V
Explore our web site link dedicated to Public Safety related adapters and cable products.
Features
Europe, EurAsia, MidEast, Africa contact: Europe@lindelectronics.com
· Low voltage shutdown at 10.5 [21] VDC
<2.5 [5]Volts
2 seconds
>10 seconds
<13.0[26] V
The RSDT is normally activated by sensing the alternator charge voltage level applied to the
60 mA
LindElectronics,Inc.6414CambridgeStreetMinneapolis,MN55426USATele:+1952-927-6303Fax+1952-927-7740
possible with external relay.
AMERICAN ZETTLER #AZ979-1A-12D
Battery Voltage Sensing timer start threshold:
Ignition ON threshold (if used):
(ignition OFF = timer ON).
(battery not charging = timer ON).
LED Flash rate in timing mode:
Power Specialists
OMRON #G8HE-1A7T-R-DC12
battery. When the alternator stops charging, the timed sequence is started. An ignition switch
High Battery Voltage disconnect threshold:
Maximum output current:
>13.5[27] V
input is provided as an optional activation method. This method is recommended for emergency
Current draw in ON/TIMING mode:
Current draw in OFF mode:
Battery Voltage Sensing turn-on threshold:
SHUT DOWN TIMER SPECIFICATIONS
voltage jump-starts.
The Lind Ruggedized Shut Down Timer (RSDT) protects the automobile battery from over
Suggested 12V External Relays
Vehicle Battery Protection Unit
· Automatic activation by sensing the battery voltage.
>5[10]Volts
TYCO ELECTRONICS #VF7-11F11
20 A
The RSDT can be factory set to any desired delay from seconds to many hours.
Low Battery Voltage disconnect threshold:
40A
Ignition OFF threshold(if used):
is discharged to a low voltage level. The RSDT also protects radio or computer equipment from
6 mA
· Loads up to 20 amps at 12 [24] VDC. Higher loads
Specifications are in brackets for [24 VDC input systems]
<< < [Pag.9] > >>
Esta version es la html del arhivo pdf LindProductOverview2008, genearada por domotica.name desde www.lindelectronics.com
Archivos relacionados:EVEREST TECH_Adapter TECH_Airline TECH_AluminA TECH_LindLit TECH_Manual_ TECH_Manual_ TECH_Manual_ TECH_Manual_ TECH_Manual_ TECH_Manual_ TECH_Plastic TECH_Rugged_ TECH_Ruggedi TECH_Shut_Do TECH_Small_A TECH_Warrant audio acousticmagic acousticsfirst amina aperionaudio audiocontrol audioquest audioshare.net auralex bowers-wilkins bryston.ca caryaudio casatools cascadeaudio chillsound conextionsystems definitivetech eliteavdist furmansound lindelectronics martinlogan monitoraudiousa mseaudio nilesaudio noble-fidelity phasetech psaudio puristaudiodesign qsonix russound sheersoundcable sherbourn sonance ticcorp triadspeakers truaudio vdn-otl
