Transmitter
be pushed to the closed/on position and all odd numbered
coin will cause the two
Illustration B
Transmitter
Works the door open/close feature on all Stanley Digital
Shows battery strength. If the light does not come on when
GARAGE DOOR OPENER APPLICATIONS
Illustration C
Coding Switches
2055 Corte Del Nogal ·Carlsbad, CA 92009
transmitter switch should be moved to the open/off posi-
slot on top of transmitter.
opener, all even numbered transmitter switches should
pressing the transmitter button, check for a dead battery.
332.2014 Radio Receiver that uses the 331.1005,
Coding Switches
WARNING: BE SURE THAT GARAGE DOOR IS
any convenient location and the other strip to the back of
Note: This transmitter will not work with the Model
Coding Wires
FOR 9- OR 10-POSITION "SWITCH"
pertain to your powerhead coding design.
Match the position of each transmitter switch to the cor-
FASTENER STRIPS
Remove the backing from both strips. Mount one strip to
the transmitter.
Example: If switch #3 is toward the open/off position on
Powerhead
RECEIVERS
halves to separate.
Locate the coding switches or wires on back of the door
position,the transmitter switch #4 should also be set in
#93863-BAGAAc
Determine which wires if any have been clipped on your
opener. When a coding wire is cut, the corresponding
Visit our website: www.keepsafer.com
®
Powerhead
transmitter switches pushed to the open/off position.
TO SET CODE
Door Openers and Radio Receivers manufactured since
ALWAYS IN SIGHT BEFORE OPERATING OPENER.
April, 1982 that use either Rocker Switches or Clip Wires
OWN SECURITY CODE
Order No. SHA24708
the closed/on position, etc.
Made in China
Open the transmitter as shown in illustration A.
opener powerhead. Follow the instructions below that
for coding as shown in Illustrations B and C.
KEEP TRANSMITTER OUT OF REACH OF CHILDREN.
tion for proper coding. With no code wires cut on the
Need help?1-800-528-4454
P/N 216877A
Insert a small coin in the
CODING FOR "CLIP WIRE"RECEIVERS
responding powerhead switch location.
INDICATOR LIGHT
© 1999 Linear Corporation
331.1006, 331.1007 or 331.1087 Transmitter.
HOW TO SET YOUR
also be in the open/off position. If #4 is in the closed/on
Illustration A
If your powerhead has only nine switches, then place the
the powerhead, its counterpart in the transmitter should
A twisting motion with the
Coding Switches
transmitter's tenth switch in the open/off position.
[Pag.1]
Esta version es la html del arhivo pdf sha24708_216877A, genearada por domotica.name desde www.keepsafer.com
Archivos relacionados:SellPoint_Sy sha24706_216 seguridad cctvsafe extremecctv freezealarm goodbarsecurity highpowersecurity icontrol infosecinstitute intamac jacksonsystems keepsafer mraccess napcosecurity nexusaudiosystems securityandmore securitymaninc smartvue techno-mall tripplite vigitron vikingelectronics wilife
