concealstatfaq Biblioteca seguridad jacksonsystems

standard thermostat (it is not an electronic sensor).

No; because it is a special bimetal thermostat, it has the same limitations of any other

· Can a Conceal-A-StatTM be used for cooling applications?

· What is the expected life of a Conceal-A-StatTM?

It is the same as any other standard thermostat.

Entryways, hallways, locker rooms, and warehouses.

Conceal-A-StatTM has a one (1) year warranty.

1 ½ degrees Fahrenheit.

thermostat).

· What types of equipment can Conceal-A-StatTM control?

Use it with only 24 Volt control circuits with a maximum current of 1.0 Amp. Use a

· What are some of the common applications for Conceal-A-StatTM?

3/13/2001

Unit heaters, fan coil units, cabinet heaters, and in-the-wall units.

Heat and moisture do not affect Conceal-A-StatTM; however, vibration could cause it

Yes; however, it should only be used where precise temperature control is not critical.

· How is Conceal-A-StatTM wired?

· Do heat, moisture and vibration cause any problems?

this built in).

· What is the warranty?

It is simply connected across the "W" and "R" terminals (just like any heat-only

cycle timer be installed in the control circuit of the cooling unit (some units may have

to work improperly. It is recommended that it not be mounted on any vibrating

surface.

· What is the temperature differential of Conceal-A-StatTM?

because it "makes" on a rise in temperature. It is recommended that a 2-wire short

relay kit (CS-RY-115 or CS-RY-220) if controlling a line voltage circuit.

Conceal-A-StatTM Frequently Asked Questions

· Is there any limitation on the thermostat wire run length?

Yes; however, a cooling version (CS-AC-70-WP or CS-AC-75-WP) must be used

· What type of control circuit should be used with Conceal-A-StatTM?

· Can Conceal-A-StatTM be used as a standard room thermostat?