ZDRect Biblioteca seguridad jacksonsystems

Zone Control Made Simple

Standard sizes range from 8" x 8" up to 36" x 24" in 2" increments.

SYSTEMS

Bottom mount models ZD-XXXX-BM are sized width (A) by height (B) with actuator on the (A) dimension.

Actual (A) and (B) dimensions are undercut 1/4".

1/16" extruded aluminum parallel blades

APPLICATION:

90 second timing

Jackson Systems reserves the right to make product changes without notification or obligation.

1/16" extruded aluminum frame

CONSTRUCTION:

Drawings are intended to show general, overall product dimensions and provide guidance for intstallation clearance. Drawings are not to scale.

ZD-XXXX RECTANGULAR,

SYSTEMS

DAMPERS

Minimum position adjustment

DIMENSIONS:

MOTORIZED CONTROL

ELECTRICAL:

Jackson Systems, LLC

1/16" aluminum mounting flange

www.jacksonsystems.com

Nylon bushings

24 Volt, 2 VA, floating point

For Zone One stand along modulating and Z-1600 modulating zone control systems with static pressures less than 1.0" w.c.

Jacks n

SPECIFICATION SHEET

Requires Z-1600-T P+I control thermostat.

44 lb.-in

Factory mounted PC actuator board and duct sensor

P: 317.788.6800 F: 317.227.1034 Toll Free: 888.652.9663

Damper models ZD-XXXX are sized width (A) by height (B) with actuator on the (B) dimension.

5418 Elmwood Avenue Indianapolis, IN 46203-6025