Away exit sound
or PIR is installed and is set to entry point.
1 Hours will flash, use arrow keys to select the hour, 24-hour
To change Duress code, see steps in `Easy install
secure.
Away exit time
8
Fine tune the operation of the control panel to your requirements; advanced
are 0 sec., 10 sec., 20 sec., up to 70 sec. in 10-sec
are 0 sec., 10 sec., 20 sec., up to 70 sec. in 10-sec
Enables you to alter the entry delay time. Options available
Home entry sound
20
2 Press OK to confirm.
Temporary code
Home exit sound
Configuring your system
Enables you to set the control unit siren (not external siren)
1 Use arrow keys to switch between options.
Programming code
Switches on, off and the volume of the door chime in the
Note: Time will have to be reset if all power to the unit is
system must be disarmed during this period otherwise an
Switches on, off and the volume of the entry countdown
Allows you to set the current time (hours and minutes).
2 Press OK to confirm the hour setting.
2 Press OK to confirm
1 Use arrow keys to switch between options.
Control unit siren on/off
increments.
To change Programming code, see steps in `Easy install
to be silent in the event of an alarm.
programming for PIRs and door/window contacts.
of a house when home arming. Zero (no delay to 70 seconds
1 Use the arrow keys to switch between options.
Duress code
control unit when an entry sensor is activated.
Selects the time delay to allow leaving the protected area
2 Press OK to confirm
the programming functions of the alarm, so it must be kept
2 Press OK to confirm.
2 Press OK to confirm.
beeps during the entry period when entering the protected
Away entry sound
1 Use arrow keys to switch between options.
Note: 30 sec. is set as factory default.
1 Use the arrow keys to switch between options.
Note: Door chime volume is set to low as factory default.
Entry delay time applies only to the zone that a door contact
2 Press OK to confirm.
Time
Away entry time
Door chime
Note: Low volume is set as factory default.
area of the house when home armed. The system must be
1 Press arrow keys to select the option.
4 Press OK to confirm.
programming' section page 8.
Switches on, off and the volume of the exit countdown
programming' section page 8. This code provides access to all
2 Press OK to confirm.
programming' section page 8. This code will arm and disarm
Note: 30 sec. is set as factory default.
can be selected in 10-second intervals.
format is used.
alarm will start.
Pin code
2 Press OK to confirm.
that the control unit siren is left on.
Note: Low volume is set as factory default.
beeps during the exit period when away arming.
Note: 20 sec. is set as factory default.
Enables you to alter the entry delay time. Options available
Switches on, off and the volume of the exit countdown
2 Press OK to confirm.
are 0 sec., 10 sec., 20 sec. up to 70 sec. in 10-sec increments.
Switches on, off and the volume of the entry countdown
Enables you to alter the exit delay time. Options available
increments.
Home entry time
Intamac.
Note: Siren ON is set as factory default. It is recommended
beeps during the exit period when away arming.
1 Use arrow keys to switch between options.
the system as normal, but will signal a personal attack alarm to
2 Press OK to confirm.
minutes.
beeps during the entry period when entering the house. The
1 Use the arrow keys to switch between options.
Entry delay time applies only to the zone that a door contact
Note: 20 sec. is set as factory default.
1 Use arrow keys to switch between options.
To change PIN code, follow steps in `Easy install
disarmed during this period otherwise an alarm will start.
Note: Low volume is set as factory default.
lost.
To change Temporary code, see steps in `Easy install
Note: Low volume is set as factory default.
or PIR is installed and is set to entry point.
Home exit time
General settings menu
1 Use arrow keys to switch between options.
programming'.
3 Now the minutes will flash, use arrow keys to select the
<< < [Pag.20] > >>
Esta version es la html del arhivo pdf YALEHSA3095Manual, genearada por domotica.name desde www.intamac.com
Archivos relacionados:ASIALIAGarti BTHomesafeIn BarnetCounci ConsumerElec HMVP1000Main IntamacCance IntamacUserG IntamacUserG PaymentMetho Peterborough TermsandCond directions_b moneyfloodin termsandcond seguridad cctvsafe extremecctv freezealarm goodbarsecurity highpowersecurity icontrol infosecinstitute intamac jacksonsystems keepsafer mraccess napcosecurity nexusaudiosystems securityandmore securitymaninc smartvue techno-mall tripplite vigitron vikingelectronics wilife
