SmartManual3.2 19 | Biblioteca motores innovativepools

off when the temperature

Sunset on Friday Saturday and Sunday by de-selecting every day but Friday, Saturday and Sunday. De-selected days

Set the devices primary address. This

for each On and Off trigger you wish to program. To erase a program press Disable Timer. When you have finished,

are White Buttons with Black Letters. Then Set and Off time for Friday, Saturday and Sunday at 11:00 pm. Repeat this

Quick Key Macros.

per device.

will turn an item ON if the

grammed into the device.

Program up to four On

and Once. The Timer screen defaults to All days (Black Day Buttons) de-select the days you do not want the program to

Select the device you would like to pro-

and four Off triggers

Each Home Control device can be programmed for up to four On and four Off times per day. These On and Off triggers

Sunrise / Sunset. Freeze

Enter a time or program by

program an Off trigger for

With the ability to control up to 40

must correspond to the address pro-

run. For Example: If you would like your Landscape lighting on every Friday - Sunday, you will program an On time for

Freeze it will turn a device

on the devices you have installed, as

well as their addresses. You will need to

Press Setup Icon, then press Program Home Control Devices.

all of your devices before you program

press enter.

Air Temp Sensor reads 35

degrees or below. If you

drops below 35 degrees.

can be either a time of day, Sunrise, Sunset, Freeze (will use 35 degrees at the Air Temp. Sensor for Freeze Activation)

Page 19

the TouchScreen. Make sure to set up

label them and set their addresses on

devices, it is a good idea to take notes

gram from the Home Control Menus.

Programming Home Automation Equipment