Note: 1. It is recommended to set the programming time for at least 33 minutes between each setting and to set the output status in the AUTO On or Auto
The display shows'--:--` for the hour and Minute indicating that the specified memory location will not be executed. If it shows the present contents of
WE-TH-FR-SA) (MO-WE-FR) (Tu-TH-SA).
Random function.
3.2
4.3
Note: It is recommended to set the winter time for the first time or after RESET, so that this function could be used clearly.
Press HR (hour) once to advance to hour.
24 hours, 7 days, weekday and weekend programming.
through the rest programming. There are a total of 6 "OFF" programming memory locations.
2
Press HR Hour key to advance one hour
executed.
Programming Times
5.4
(OFF)
6.2 To change from Winter to summer time- Simply perform steps 5.1 the 1hr sign will disappear and the current time will retard one hour.
Press DAY key to advance to current day.
6. Summer / Winter
Press the PRG (program) key until the preset memory location is present .
3.3
The Default is for ALL DAYS, if you would like to program for specific days of the week, Press DAY key to choose the day groups you wish to
ON: The unit is permanently in ON status
1.2 Use a pointed object (e.g a pencil) to Press RST (reset) button to delete all previous programming.
5.
To OVERRIDE program execution status, press the (override) key to switch the output status in the sequence: (AUTO-OFF) - (ON) - (AUTO ON) -
Setting Time
6 ON and 6 OFF Memory Locations.
Note: Be sure to set the output status in the AUTO ON or AUTO OFF status to avoid missing execution of programmed times.
7.2 To cancel the random function. Keep TIME key pressed while Pressing PRG key and the RND sign will disappear from LCD display.
Be sure to Press the time key after programming / review the contents of the memory locations, otherwise these switching times will not be executed.
programmed memories you have preset will be executed in a random delay from 2-32 minutes by using this function
Summer/Winter time change over.
4.4
4.6
Rechargeable Battery Backup.
AUTO ON: The unit is under control by program in the ON status
5.2
switch on the appliance . The day groups will advance in the sequence of (MO-Tu-WE-Th-Fr-SA-SU) (MO-TU-WE-TH-FR) (SA-SU) (MO-TU-
Press PRG key again to advance to next "PROG 1OFF " which indicates the switch-off time command to be entered, Then follow the steps 4.2-4.5 to
Press PRG (programming) key once. You will see "PROG 1 ON" on the LCD display which indicates the switch ON time command to be entered.
6.1 To change to summer from winter time-Keep TIME pressed while Pressing the override key to change the current time to summer time. The LCD will
24 Hour / 7 day digital electronic timer.
3.4
operation.
indicate the 1h sign and the current time will be advance one hour.
Set up current time before you enter any ON/OFF programs
Press MIN (minute) key to advance one minute.
Manual override with permanent control or automatic control.
It is possible to change the summer to winter time with the aid of this function easily.
Operation
7. Random Function
4.1
Note: Pressing the keys Day, HR, or MIN for more than 2 seconds, a fast run through is carried out.
4.5
Note: 2.During the random delay time, the RND sign will flash until the On or OFF output. But the random relay time will be interrupted by manual
5.3
The Timer will automatically switch to current time mode if no key is pressed for 2 minutes.
Clearing a Program using the Recall Function.
OFF: The unit is permanently in OFF status
7.1 Keep TIME key pressed while Pressing PRG key. The LCD display will indicate RND sign to remind the user that the random function is active.
Note: Pressing the key DAY, HR, or Min for more than 2 seconds, a fast run through will be carried out.
1.1 power on the main switch for approx. 6 minutes to charge the unit.
hour and minute this indicates that the specified memory location will be executed.
4.2
1.1
Press MIN (minute) key once to advance one minute
4.
3.1
Off status, so that this function could be used clearly.
You will have the advantage of preventing a break in or theft by using the random function in conjunction with the appliance connected to this unit. The
3.
AUTO OFF: The unit is under control by program in the OFF status
The LCD display the output status as-
Keep TIME key pressed while you are setting or correcting the current time
To erase one of the Programmed Times you can use the RCL (recall) key to enable or disable the executing of the program.
The preset memory will be recalled once you Press the key DAY, HR, MIN, if the memory is in disable status. (LCD display --:--)
Use a pointed object (e.g pencil) to depess the RCL (recall) to enable or disable the switching command.
Note: Be sure to Press the TIME key after programming review of the contents of memory locations, otherwise these switching times will not be
Innovative Pool Products TE 501 and ET-1 Instructions
Manual Operation
5.1
[Pag.1]
Esta version es la html del arhivo pdf ET-1, genearada por domotica.name desde www.innovativepools.com
Archivos relacionados:ET PHONELINK SmartManual3 SpaTempInst motores activateddecor aquaair-wetdry auton avrak closystems endlesspools hpproducts.net innovativepools mediadecor peerlessmounts plasma-tv-lift silentgliss-usa somfysystems watercop
