Crosstalk:
The eight mono and four stereo signals each have level
963003-2766
OPTIONS
cable
is supplied with a 25-foot super-flexible interconnect cable
ing cables.
or in-ear monitors, a jack for a talk-back footswitch, and two 50
Sensitivity:
0110-3
HRM-CONN: Cable-mount Centronics connector, for making
l
the maximum continuous power out.
Power Requirements: HDS-16: 120 VAC, 60 Hz, 82 Watts
with 220/240 VAC mains. Since HRM-16 units derive their
for linking or daisy-chaining HRM-16's, or for extending exist-
the HDS-16. The other configuration allows communication to
Balanced, 50k impedance, 90 dB
HRM-RAW: Raw HRM-16 cable, priced per foot, for those
Line Outputs:
Distortion and Noise: Less than .002% THD, 20 Hz to
with the included mic stand clip and hardware, or be placed on
Connecting HDS-16 and HRM-16's is easy, as each mixer
full volume/low distortion headphone mixes to be created on the
W x 7" D; Weight: 3.5 lbs. (1.6kg)
HRM-16: Dimensions: 2.875" H x 11"
Less than -95 dB at 10 kHz
25 twisted pair, 24 AWG, with overall shield, Centronics 50 pin
Up to eight HRM-CABLs may be joined, making a total
plug (male) each end. The length of cable used only affects
W x 8" D; Weight: 9.4 lbs. (4.3kg)
HRM-16's.
Mechanical:
desiring to make their own cables in exact, custom lengths.
Greater than 105 dB
CABLE SPECIFICATIONS
plates and gaskets.
HRM-16EX: Extension adapter which allows two HRM-CA-
The HDS-16 and HRM-16 are protected by a three-year
fly.
32 headphones:
-0.16 dB (746 mW vs. 770 mW
HDS-16: Dimensions: 3.5" H x 19"
The HRM-16 Remote Mixer may either attach to a mic stand
controlled via a stereo effects return knob. Also on the rear
background image
HDS-16 Rear View
return jacks; the affected signal is returned into the mix and
per cable segment (see Cable Specifications below).
installation kits are available as well (see below).
length of up to 200 feet (62m), using one HRM-16EX adapter
pin Centronics connectors to allow daisy chaining of up to four
impedance, 68 dB output CMRR
HDS-16E: 230 VAC, 50 Hz, 82 Watts
+4 dBu for rated output
HRM-THRU: Wallmount kit consisting of two Centronics con-
board in the HDS-16. One way allows the talkback mic on each
260 mW at 600
configured two different ways by moving a jumper on the circuit
limited warranty covering defects in materials and workmanship.
a table or shelf. The unit requires no external power, and allows
20 kHz at full rated power
which can easily be extended or routed through walls and daisy
OPTIONAL ACCESSORIES
Inputs:
HDS-16 AND HRM-16 SPECIFICATIONS
Losses for additional cable beyond 100 feet:
l
BLs to be joined together to create extended cable lengths.
panel of the HRM-16 is a mono line out 1/4" jack to drive stage
Power Output:
l
Frequency Response: +0, -1 dB from 13 Hz to 32 kHz
power from the HDS-16, no special HRM-16 model is
controls. Each mono channel also has a pan control and an
nectors linked with an 18 inch flat cable. Includes two wall
effects send control which feeds its own rear panel 1/4" send/
100 headphones:
l
750 mW at 32, 770 mW at 100,
needed.
the HDS-16 only. This is particularly useful for stage use where
The HDS-16 and HRM-16 are sold separately.
cable
maximum output) per 100 feet of
l
l
HRM-CABL: Replacement 25 foot (7.7m) Centronics cable
custom cables.
(including the user's own monitor).
CMRR
-0.34 dB (693 mW vs. 750 mW
Dynamic Range:
The unique talkback system is extremely versatile. It can be
the user's talkback mic should not feed into all of the monitors
HRM-16 to be fed to all of the other HRM-16 units as well as
chained to other HRM-16's. Cable extenders and thru-wall
maximum output) per 100 feet of
Balanced or single ended, 50
Model HDS-16E: "E" suffix version is for use in countries
THREE YEAR LIMITED WARRANTY
< [Pag.2]  

Esta version es la html del arhivo pdf HDS-16_HRM-16_datasheet, genearada por domotica.name desde www.furmansound.com

Archivos relacionados:AC-215_datas ACD-100_data ACD-100_manu AR-1215_AR-2 AR-1215_manu AR-1230_data AR-15_datash AR-15_manual AR-20_datash AR-PRO_datas AR-PRO_manua ASD-120_data ASD-120_manu Furman_Merit Furman_Merit HDS-6_HR-6_d HDS-6_HR-6_m HR-2_manual IT-1210_IT-1 IT-1230_manu IT-20_II_dat MERIT_SERIES MERIT_SERIES PL-8_PL-PLUS PL-8_PL-PLUS POWER_FACTOR POWER_FACTOR POWER_LINK_d POWER_STATIO PS-8R_II_dat PS-8R_II_man PS-8_PS-8R_P PS-8_PS-8R_d PS-PRO_II_ma PST-6_manual PST-8_D_manu RACKRIDER_PW RL-I_RL-LED_ RS-1_RS-2_ma SERIES_II_15 SERIES_II_15 SERIES_II_20 SERIES_II_20 SP-20A_datas SPB-8C_datas SPB-8C_manua SPB-8_datash SPB-8_manual audio acousticmagic acousticsfirst amina aperionaudio audiocontrol audioquest audioshare.net auralex bowers-wilkins bryston.ca caryaudio casatools cascadeaudio chillsound conextionsystems definitivetech eliteavdist furmansound lindelectronics martinlogan monitoraudiousa mseaudio nilesaudio noble-fidelity phasetech psaudio puristaudiodesign qsonix russound sheersoundcable sherbourn sonance ticcorp triadspeakers truaudio vdn-otl