CAUTION!
breakers rated at 20 amps shall be provided for each circuit.
screwdriver. Buss input connections shall accommodate wires
from 2 AWG through 8 AWG. Buss output connections shall be
START
terminating the supply cable.
FE
shall absorb a surge current of up to 6500 amperes for 10
provided for each output, allowing it to be set ON or OFF locally,
C
DO NOT OPEN. REFER
RELAY
120 VAC
B
REDUCE THE RISK OF FIRE
1 nanosecond. Maximum Surge Current: 6,500 amps. Maximum Spike Energy: 80 joules per circuit.
indicator readable at 20 feet showing the circuit ON status. Circuit
Three Year Warranty
E
REM
COM
panel.
Input Voltage: 120/240V single phase, or 208V 3-phase
+12V
The unit shall be the Furman ASD-120 Sequenced Power
MUST BE DONE BY QUALIFIED PERSONNEL
f
60HZ
of solid copper capable of handling at least 125 amps. A secure
CONNECTION OF A POWER INPUT CABLE
amp duplex outlet for each. Outlets shall be turned on and off by
D
ONLY.
The ASD-120 is manufactured in the United States of America
A
Max 130 VAC from REM COM to chassis
a cable or wire bundle up to 1.5 inches in diameter. Cable
REM
with metal oxide varistors (MOV's) connected between the hot
Each circuit shall include a protective device capable
MAX LOAD
Common isolated from chassis and control ground. 130 VAC max from relay common to chassis.
EXPOSE THIS EQUIPMENT TO
Mechanical: Weight: 20 lbs (9.1 kg). Dimensions: 3.5" H x 19" W x 9 5/8" D (8.9 x 48.3 x 24.4 cm)
There shall be six output circuits on the rear panel, with a 20
Heavy duty Thermal, 20A
20A
then tightening the strain relief clamp. Complete instructions
via repositionable Fast-On connectors. Buss construction shall be
FORCE
A
MADE IN THE USA
The Furman ASD-120 is protected by a limited three year
ASD-120 SPECIFICATIONS
microseconds without damage.
warranty covering defects in materials and workmanship.
Internally configurable as normally closed or normally open.
RISK OF ELECTRIC SHOCK.
Power Consumption at 130 VAC: 23 watts
Delay Interval: 0.2 to 10 seconds per step (adjustable with internal trimpot)
INPUT 120 / 3 208 / 240 VAC
POWER SEQUENCING
Optically isolated, AC or DC drive, 12K ohm input impedance. Operates at 5 VDC or 6-130 VAC.
termination is a simple process of breaking out and stripping the
OTHER
14400 WATTS
individual conductors and connecting them with set screws, and
line-coupled spikes in less than a nanosecond, clamping transient
voltages to safe levels of 200V peak or less.
Safety Information: ETL/CETL listed
cable up to 1.5 inches in diameter.
120 AMPS MAX
SIGNAL RELAY OUTPUTS
VOLTAGE AND CURRENT
shall occupy two units (3 1/2") of rack space.
SERVICE PERSONNEL. TO
SERVICING TO QUALIFIED
OFF
The Power Distro shall mount in a standard 19" rack, and
Construction: Steel chassis, zinc chromate plating; .125" brushed and black anodized aluminum front
AVIS: RISQUE DE CHOC
ON
COM
Distro.
STATUS
readable at a 20 foot distance showing the circuit ON status.
REM CONTROL INPUTS
sequence time shall be internally adjustable from 1.2 to 60
heavy duty 25 amp relays. A three position switch shall be
Response time shall not exceed 1 nanosecond. The devices
ASD-120 rear view
D
F
ELECTRIQUE -- NE PAS OUVRIR
WARNING! ELECTRIC SHOCK HAZARD.
FORCE
B
Architects and Engineers Specifications
C
SPIKE/SURGE PROTECTION Spike Protection Mode: Line to neutral on each circuit. Clamping Voltage: 200V peak. Response Time:
It shall employ a four-buss structure (plus chassis ground)
RAIN AND MOISTURE.
of clamping line to neutral spikes to no more than 200V peak.
Sequencing shall be provided for each of the six circuits. Overall
The ASD-120 provides basic spike and surge suppression,
overriding the sequence. Each output shall have a front panel
cable clamp shall be provided which can accommodate an input
GND
Input Current: 120 amps
seconds. Each circuit shall have a front panel indicator clearly
TO THIS DEVICE AND TO A POWER SOURCE
1-9913
accompanying the unit detail the process of selecting and
Relay can switch 1/2 amp max @ 125 VAC, or 1/2 amp max @ 24 VDC.
OR ELECTRIC SHOCK DO NOT
CIRCUIT BREAKERS
and neutral conductors of each circuit. The MOV's respond to
which can be re-configured as needed using an ordinary
Output: Six identical 20 amp, 120V circuits
< [Pag.2]
Esta version es la html del arhivo pdf ASD-120_datasheet, genearada por domotica.name desde www.furmansound.com
Archivos relacionados:AC-215_datas ACD-100_data ACD-100_manu AR-1215_AR-2 AR-1215_manu AR-1230_data AR-15_datash AR-15_manual AR-20_datash AR-PRO_datas AR-PRO_manua ASD-120_manu Furman_Merit Furman_Merit HDS-16_HRM-1 HDS-6_HR-6_d HDS-6_HR-6_m HR-2_manual IT-1210_IT-1 IT-1230_manu IT-20_II_dat MERIT_SERIES MERIT_SERIES PL-8_PL-PLUS PL-8_PL-PLUS POWER_FACTOR POWER_FACTOR POWER_LINK_d POWER_STATIO PS-8R_II_dat PS-8R_II_man PS-8_PS-8R_P PS-8_PS-8R_d PS-PRO_II_ma PST-6_manual PST-8_D_manu RACKRIDER_PW RL-I_RL-LED_ RS-1_RS-2_ma SERIES_II_15 SERIES_II_15 SERIES_II_20 SERIES_II_20 SP-20A_datas SPB-8C_datas SPB-8C_manua SPB-8_datash SPB-8_manual audio acousticmagic acousticsfirst amina aperionaudio audiocontrol audioquest audioshare.net auralex bowers-wilkins bryston.ca caryaudio casatools cascadeaudio chillsound conextionsystems definitivetech eliteavdist furmansound lindelectronics martinlogan monitoraudiousa mseaudio nilesaudio noble-fidelity phasetech psaudio puristaudiodesign qsonix russound sheersoundcable sherbourn sonance ticcorp triadspeakers truaudio vdn-otl
