FLPoolOMDMver 19 | Biblioteca motores endlesspools

and filtration, does most of the work for you. Balancing and maintaining your pool

Periodically check all electrical and ground wire connections and test the GFI circuit

necessary. Adding 1/2 cup of Clorox a day will add about 0.5 ppm of free chlorine

Clean the intake grill of the Fastlane Swim Unit of leaves as needed.

water is essential to the life and health of your equipment.

The Water Quality System, which includes automated re-circulating, optional heating

maintenance.

properly balanced and in accordance with normal, pool industry standards.

Page 19 of 23

It is important for the long-term operation of your Fastlane that your pool water is

receives.

Clorox.

water temperature, swimmer load and the amount of direct sunlight the pool

The hydraulic motor, which is located in your Swim Unit and submerged underwater,

FLPoolOMDMver1.2

breaker for proper function.

maintain a minimum level of 0.5 ppm.

Daily:

If your Fastlane Pool is located outside, we recommend using the granular form

Do not leave pool set up without being full of water.

Pre-dissolve all dry chemicals before putting them into the pool. Failure to do so

Test for free chlorine after your swim or at least a few times a week.

Add chlorine to maintain free chlorine levels between 0.5 and 1.5 ppm.

CARING FOR YOUR FASTLANE POOL

Maintain a minimal level of 0.5 ppm free chlorine in your pool at all times as

Brite pad and brisk rubbing.

of stabilized chlorine (should have an active ingredient of sodium dichlor) instead of

The Fastlane

therapy and family fun with minimal maintenance.

We have provided water test strips that will help you monitor the chlorine and pH

Always have your pool running when adding chemicals, liquid or dry.

As with any swimming pool, your Fastlane Pool requires water chemistry monitoring.

to a Fastlane Pool. How quickly that chlorine is consumed will depend upon the

5/22/08

requirements of your Fastlane Pool.

Change the hydraulic fluid and filter in the Power Unit after every 500 hours of use.

Once installed, your Fastlane Pool will provide years of swimming, exercise, training,

should be replaced after three years of usage.

Clean the acrylic housing with any typical non-ammonia, non-abrasive kitchen

cleanser.

may result in bleaching or damaging your liner.

Do not leave pool filled with water without proper chemical treatment and pool

Wipe down the stainless steel rails and any other steel components with a Scotch

will find that you may not have to test chlorine as frequently in order to

As you become familiar with the chlorine demand for your Fastlane Pool, you

Pool Water Chemistry