m8manual 9 | Biblioteca audio eliteavdist

MUTE

remote as described later in the `Settings Menu Structure' section. Note that if the brightness is set to

VOLUME CONTROL

MUTE

DISP

of this button.

LAY

DISP

The display button on the remote enables you to quickly adjust the display brightness to either off or the

ME CONTROL

DISPLAY

ME CONTROL

volume, while the left side button decreases the volume. Briefly press either button to make fine

The phase of the input signal to the preamplifier is toggle from absolute to inverted 180° with each press

zero, any button press will bring the brightness back to the current user setting so the screen can be read.

VOLU

DISP

VOLU

MUTE

LAY

HASE

PPPPHASE

MUTE

Pressing this button toggles the Plinius M8 in and out of mute.

ME CONTROL

display reverts to the current user preset level. This user level is set using the menu buttons on the

Standby disconnects the outputs of the preamplifier and turns off the vacuum fluorescent display tube. It

user set brightness level. If depressed once and the display brightness falls to zero, another press and the

HASE

STANDBY

Use these two buttons to control the volume level of the preamplifier. The right side button increases

is recommended that whenever the Plinius M8 is left switched on but not in use, the standby function be

activated to increase the life of the display tube.

adjustments to the volume level. Hold down either button to continually adjust the volume level.

STANDBY

HASE

VOLU

LAY