mains power at the amplifier end, while a local mains plug is required at the wall end.
PLACEMEN
EXPLAI
S CORRECTLY FOR YOUR SYSTEM, (AS
Blue to Neutral
unimpeded, so ensure that the heat vents (slots in the lid and base) are not covered or restricted in any
GE CONNECTION
GE CONNECTION
IMPORTANT
S CORRECTLY FOR YOUR SYSTEM, (AS
DO NOT POWER UP YOUR AMPL
T AND VENTILATION
NED IN THE NEXT SECTION).
DO NOT POWER UP YOUR AMPL
PLINIUS
YOUR INPUT/OUTPUT
Blue to Neutral
MAINS VOLTA
location is upon a rigid stand, or floor mounted away from direct contact with any temperature sensitive
IFIER UNTIL YOU HAVE CONNECTED
PLINIUS
EXPLAI
Green to Earth/Ground
HAVE CONNECTED
Should a `local' plug need fitting to the wall end of the lead, ensure that a suitably qualified service
Brown to Phase/Live
HAVE CONNECTED
YOUR INPUT/OUTPUT
amplifier. Consult your PLINIUS
IFIER UNTIL YOU
NED IN THE NEXT SECTION).
Blue to Neutral
DO NOT POWER UP YOUR AMPLIFIER UNTIL YOU
Mains supply power connection is via the supplied plug-in lead. A standard IEC socket connects the
PLINIUS
IMPORTANT::::
PLACEMEN
PLINIUS dealer.
Your Plinius 9100 may operate at a moderately high temperature when being driven hard. The ideal
technician wires the plug correctly.
PLACEMENT AND VENTILATION
Brown to Phase/Live
MAINS VOLTAGE CONNECTION
Green to Earth/Ground
MAINS VOLTA
9
PLINIUS
T AND VENTILATION
YOUR INPUT/OUTPUTS CORRECTLY FOR YOUR SYSTEM, (AS
The Plinius 9100 design incorporates a very high level of mechanical de-coupling of the input and output.
T AND VENTILATION
PLACEMEN
materials or deep pile carpets. Ventilation through and around the amplifier should also be kept
EXPLAI
EXPLAINED IN THE NEXT SECTION).
acoustic cones, or a suitably spiked amplifier stand or table, may further enhance the performance of this
Green to Earth/Ground
It can however still be influenced by acoustical feedback in the operating environment. The use of
HAVE CONNECTED
PLINIUS dealer for further advice if required.
IMPORTANT
way.
Firstly, check that the mains supply voltage printed on the rear of this amplifier is similar to the mains
IFIER UNTIL YOU
Brown to Phase/Live
DO NOT POWER UP YOUR AMPL
YOUR INPUT/OUTPUT
IMPORTANT
GE CONNECTION
Blue to Neutral
MAINS VOLTA
supply voltage in your area. If in doubt, please consult your PLINIUS
NED IN THE NEXT SECTION).
The wiring code used inside all Plinius product is:
Green to Earth/Ground
S CORRECTLY FOR YOUR SYSTEM, (AS
Brown to Phase/Live
<< < [Pag.9]
Esta version es la html del arhivo pdf 9100manual1, genearada por domotica.name desde www.eliteavdist.com
Archivos relacionados: audio acousticmagic acousticsfirst amina aperionaudio audiocontrol audioquest audioshare.net auralex bowers-wilkins bryston.ca caryaudio casatools cascadeaudio chillsound conextionsystems definitivetech eliteavdist furmansound lindelectronics martinlogan monitoraudiousa mseaudio nilesaudio noble-fidelity phasetech psaudio puristaudiodesign qsonix russound sheersoundcable sherbourn sonance ticcorp triadspeakers truaudio vdn-otl
