VMAX_Install Biblioteca audio cascadeaudio

sales@cascadeaudio.com

Scissors or a razor knife

washing thoroughly with warm, soapy water to remove any

Installation:

Tech Tip:

The material can be cut with scissors or a razor knife. Remove

022004-LO-R1

Product must be installed within one year for best performance.

· Be sure to clean the surface of automotive body panels by

TOOLS:

has been achieved.

dirt or dust particles. CAE recommends cleaning the surface

remove unwanted wax and grease.

www.cascadeaudio.com

to substrate. For larger surfaces, pull release liner down about

PH: 541-389-6821 - FX: 541-389-5273

down the panel in 6 to 8 inch increments until full adhesion

V-MAX

once more with an ammonia based, aerosol glass cleaner to

· 50% coverage will yield good damping, however 75% to

the release liner and apply to the prepared surface. Apply

Please Note:

100% coverage will maximize the effects of the product.

Preparation:

· Cut the VMAX damping sheet to fit the panel to be treated.

pressure to damping sheet with fingers to ensure good contact

6 inches and apply to surface. Keep working the material